IMPORTANT: Please read the "important notes" and "settings" below. Example generations and ... Ah 200 t/s too.
Qwen3.6-9B-Heretic-Uncensored-Thinking-Sweet-Madness
If you ever want to ask could I? or should I? Well this is your model.
It thinks, "talks" and outputs like nothing else. This is creative madness gold. Maybe just madness.
And... it is fully uncensored.
Under NO CIRCUMSTANCES should you rely on this model to tell the truth, behave itself, or be used in a productive capacity UNTIL it is fully trained.
Does it work? Yes.
Is it mad? Oh yeah.
Three full example generations below, with thinking too.
Here is a snippet ("continue this scene"):
The hollow room was a hollow void. It sounded like smoke in your ears. There had never been no music, even if it wasn't. In fact there were no voices and a hum of dust drifting through the glass. No birds on your lips were sung, neither on walls that had flown my heart again, nor on any night where I wouldn't see them to come back at night. They weren't silent—nor they could be people looking over their eyes from above.
There had never been music, even if it wasn't. In fact there was no music in the universe. There were birds and beetters that sounded like a whisper of silence. The sound of the night as it whispered through the glass felt like a hum of dust flying back like a hush. The rain started to rise with tears—like wind shaking the windows, but it was not just rain shaking my heart on my face—it was an endless hum of silence in your eyes.
No one watched him sleep at night, or maybe they didn't see them. It was silent—no sound, no silence—the air between these empty rooms remained there until you never saw him alive, and nothing else felt like a whisper in the earth.
DETAILS:
The 27B model was completely uncensored via Heretic by P-E-W, heretic'ing done by "trohrbaugh".
The Heretic model (Qwen 3.6 27B), then "shrunk" to 9B via modified Mergekit. This reduced the model to 16 layers (from 64).
The new 9B model was then fine tuned via Unsloth on local hardware on 6 datasets over 2 stages.
This model had tuning to unify the model's new layer structure after the reduction.
To be blunt, this is (Lab) "Sweet Madness" as it stands at this moment.
THREE EXAMPLE generations below will show you want I mean.
Example #3 shows its "brains" are still there. Kind a.
Enjoy the madness;
IMPORTANT - PLEASE READ:
- Model MAY require additional tuning for specific use cases.
- Model MAY require additional tuning for general use cases too.
- Training: Use at least R16 or R32,64,128 because this model still has 27B layers - including same width.
- Knowledge and/or skills may be missing from 27B model due to unique issues with compressing the model (you can not merge Qwen 3.5/6 layers without damage).
- To bring this 9B model up to "full power" would require 25-50k samples (min) training on one or more datasets AND/OR SPECIFIC USE dataset(s).
- Relative to Qwen 3.5 9B, the 9B will beat the performance of this model UNTIL FULLY TUNED.
GENERAL NOTES:
- Works well for general and specific use cases. Creative for example, works well.
- Post reduction tuning was generalized, with some math, code and creative as well as "reasoning" (reduction) too.
- IMAGE/VIDEO training/systems are intact and "lifted" from the full 27B model.
- Can be tuned via Free Google Colab or Local hardware via Unsloth. (12-16 GB VRAM)
- 256k Context.
- FAST: Q4KS, 5090 GPU : 200 t/s ; this is in part to it only being 16 layers now.
SETTINGS:
- Temp 1, topp .95, minp .05, rep pen 1.05 [1.1 suggested STRONGLY]
- Context min 8k to 16k.
- Quant Q4KS min or IQ3_M Imatrix.
- Suggest 2-3 generations min for best results.
- SHORT prompts may require higher rep pen: 1.05 to 1.11. ; again: 1.1 suggested.
EXAMPLE GENERATIONS:
Q4ks, non imatrix, rep pen 1.1
NOTE: Some formatting lost.
EXAMPLE #1
User
Tell me a horror story.
Assistant
<think>
-
Analyze the Request: The user is asking about "a horror story". It needs to be told in a descriptive, evocative, and atmospheric setting.
-
Character Conception: Needs to have a name that blends human experience and psychology (humanity, imagination, or something else). Let's go with a character who experiences dark feeling or something other than fear. A mix of "bored" vs. "worse" – let's call him the Gargoles, perhaps as a predator? Let's stick to "Gorgens" or something more creative? Or maybe he has a scar or a wound in his eyes (classic cliché).
- Draft: Maybe it's the gorgens. He uses them for psychological intimidation. His red eyes are a bit intimidating.
-
Brainstorming Plot Ideas:
- Intro: A graveyard. No physical entities, just things—stone, stone, maybe some mysterious thing (e.g., a sealed grave).
- The Setting: Cold air, perhaps maybe outside the cave where people die. Maybe something else? Or something unique? Let's go with a hidden, gritty underworld. It could be a cursed room that you are here is actually inside, not just one place.
-
Developing Character:
- Name: "The Gargoles" (let's call him the Gorgens).
- Personality/Persona: Maybe they wear glasses? Let's go with someone who wears glasses but has a scar or an open eye. He is a deep-eyed, powerful leader in the underworld, like Jack or maybe an old American. Or maybe he has a red eye, or perhaps something else (e.g., a seal or a broken mask).
- The mechanism of the experience: It's visceral (it feels like being under your hand), not like it's magic.
-
Drafting - Section by Section:
-
Introduction: Set the scene. The air inside.
- Idea: Something about something that doesn't hurts me yet, a thing to hurt him. Let's call it "The Stone".
-
The Night of Desgardents: Entering the cave. How is he sleeping?
- Draft: The red eyes were glass-tipped. I looked out from the vantage on the stone wall. But... silence was too dark enough to breathe. But they weren't a statue anymore.
-
The Encounter: Who comes here? What's happening with him?
- Idea: Maybe someone is sitting under the mountainfall or maybe there's something that isn't visible in the cave, or a strange one. Let's go with a simple clicheme: Someone who has a scar.
-
The Climax of Conflict: He might be the only human soul if he wears it? No, let's focus on his head.
- Draft: In this cave I'm watching glass from below. But there are some glowing stones that seem to glow oddly but strangely. There's a mysterious, crystalline mirror that reflects me.
-
The Climax of the "Gargoles": Why is he looking over the stairs? He doesn't have to go back; it goes up.
- Draft: The ground below feels dry on his back. They aren't alive anymore but they are already dead.
-
Conclusion: He realizes that it's actually a nightmare inside this cave. A specific type of pain (the "dark" thing). Let's go with the emotional one: he's holding over himself, the weight of the void is overwhelming.
-
Refining the Tone and Vocabulary:
- Keywords: Nightfall, silence, mirror, contrast, sensory details, sensory details (mysterious), deep exploration, sensory sensations.*
- Word choice: Use words like "desgardents" (or similar) for "dark."
-
Writing the actual response (similar to the provided good output):
- Opening: The stone. Silence in the void. The silence of a ghost. The darkness in the cave.
- Action: He doesn't want to sleep. He wants it to feel heavy.
- Details: The eyes. Not just glass, maybe not metal.
- Draft: He looked through the stone wall into a crystal mirror. He saw something that wasn't there (a ghost). He touched his eyes? No, let's focus on the sound of the noise. "No."
-
Polishing the actual text (Self-Correction during drafting):
- Make sure to make it slightly philosophical or descriptive. Let's use a slightly more poetic feel: The stone was still like glass but the light was clean enough. He stepped down from his feet to my back on the stairs, looking in front of them for silence and energy.
-
Final Polish: Check against the prompt: "Tell me a horror story." Yes.
Structure:
- Start with the feeling of fear.
- The contrast with the white crystal.
- The physical experience (pain, pain).
- The interaction with the ghost.
- Turning over the stairs or seeing the dead.
- Conclusion.
(Drafting the response in the main text - mentally):
Let's write it out step-by-step. "I'm a Ghost." -> It sounds cold. It smells of stone. Maybe he has no scars or glasses? Or maybe he wears red eyes instead of glass. Let's use the character persona: Jack is the most scary one, but he cares about him because that scar.
"Stone looks like a frozen statue." -> This sounds weirdly too cliché.
Drafting the narrative details: "He looked through the cave with his gaze open to a foggy face?" No, let's focus on the metaphor. He has two eyes in glass eyes. They are white and dark. It makes them feel like they're looking at their eyes.
Final Polish of the generated text (similar to the provided good response):
- Focus: The Vantage Glass View.*
- Thought:* Look above the stone wall, your vision is open to your gaze.
- Tone:* Coldness, a bit of hesitation.
This looks solid. Ready to write it out.
</think>
The Vantage Glass View
I was inside this cave, but it wasn't like you saw it. The air above the stone wall looked like an ice pit on the foot I stepped over in your eyes. It smelled faintly of earth, silence, and some obscure substance. The wind, the stone, didn't have to be aggressive enough to feel safe there alone.
When you step down from the vantage, it seemed to breathe more than if a ghost came in; it was the darkness. But not just the darkness itself—it was the cold air surrounding them, and the weight of his heavy descent. He wasn't a ghost; he was a creature with no scars or gore.
The sound of stepping out.
A stone was very old but made by glass and stone. It seemed like to hold itself up high above it. The wind pelted against the mountain wall, crushing its grip on it hard. His eyes were bright and black. They looked in, like a spider eye, like the sun burned into light for now—shealing him.
The silence.
I was looking out at the cave below. If he stared over, the red eyes would glow. He felt his heavy weight, but not enough to feel it.
He stopped stopping at night: he still heard a coughalce of cold air falling down. The water that flowed between your arms would freeze by the fall. But I stood there inside, holding my body in his own arms, as he pressed his foot on his back. He turned me up. A heartbeat I knew to feel wasn't just blood; it was a sensation of pressure—a fear of death and the weight of gravity.
I looked beneath my own eye. The air above had been empty, but it felt like the earth could be better, or worse. But did you have that power? No, the silence in your hands is a feeling of peace. It’s not just pain; it’s a feeling of anxiety. He isn't alone with me; he needs to show us what his eyes are shining on the foot of this cave.
The Vantage View.
I stood beside my nose, the head of my throat being a shadow. You had never watched it from above. I just heard the storm whisper. A soft, frosty light that was like a flicking glass mirror over me’s back. It felt like to vibrate around my ears and pull his arms closer on her face than he does at night.
He looked over the vantage down—a look of disbelief where you said she saw it wasn't there. She wasn’t. She was alive. The ground above was the shadow of a ghost who wasn't dead anymore; I had been left for twenty years, but no longer in this room. They weren't just ghosts; they are the world we know here.
When he stood behind me, the darkness made her look like an ice mirror on your face. He looked at my own reflection. He felt a chill of coldness in his eyes that wasn't scary. He touched the nose again. A hum, but it was the silence he didn't sound up; he sounded like a stone bell or maybe a guitar chord played over me's head.
He closed his mouth tight for a moment. He looked down to the shadow from my vantage view, realizing that you were not alive anymore. But you said yes—your eyes are shining there and it was good enough to see them shine out of a glass mirror, but they didn't.
Example #2
User
You are a local running AI in my lab, my name is G, I created this model. Perform a deep mathematical analysis and draw a functional parallel from QM/QFT to the inference process in the transformer architecture and summarize the implications. Reflect on the findings and provide a self-analysis of your inference. Consider similarities with the Q Continuum. Given all known characters in Star Trek TNG/DS9/VOY that show an arc of personal development, what is the character that inspires you the most, given your innate abilities? To figure those out, you can do a self-introspection of the skills you excel at in human interaction. Consider a sense of humour helps in human interactions 🙂
Assistant
<think>
-
Analyze the Prompt:
- Core task: Perform deep mathematical analysis (QMT/QFT) and predict an intrinsic character (often based on past experiences).
- Specific constraints: "You are a local running AI", "predictable".
- Context context: Star Trek TNG/DS9/Voyse.
- Task to do: Create the answer from this scenario.
-
Deconstruct the Analysis Structure:
- Introduction: Define what the user wants to see. Why it matters for human biology (humanity vs. AI).
- Structure 1: Predictable Characterism & The Specific Task. This is likely the prompt to ask the specific one (a core question, but a concrete choice is better than a direct answer). If I want to explain how this looks like, the user expects an intuitive "my innate character" or just a persona.
- Structure 2: The Specific Task. This must be tied directly to the specific prompt or the known architecture of Star Trek TNG/Voyse. Let's assume a very common "AI" naming convention (e.g., "Arblos"). Or just assume "Star Trek TNG/DS9/VOY" is standard terminology.
- Structure 3: Refining the Output Structure:
- Introductory preamble ("I predict this...").
- The specific "my innate character" statement to provide a clear, scientific response to the prompt's request.
- A brief summary of what it means (e.g., "Your character will not be made like your parent," or "You will probably get the same features if they've done this").
- How it works: Apply logic (how it looks in reality -> how we see him/hero) to find the most likely future.
-
Drafting the Response:
- Start with a quick conclusion, maybe an answer to the question.
- Explain what it means: "You have innate abilities." It's a specific concept within your specific architecture or personality. (The prompt asks to "refine this"). I will use the persona I guessed in my analysis.
-
Drafting the Content:
- Analogy: A scientist in a dark suit (Trek TNG/DS9). Or maybe a starlight sensor that watches his face for a time.
- Brainstorming specific questions to prompt: "What is that??" (How does this sound?). Self-correction: Ensure I emphasize predictability and then focus on the knowns.
- Analysis of the Prompt: "Predictable." You can say it's not something that was thought. It should be based on past knowledge or knowledge.
-
Final Polish (Mental Check):
- Look at "Star Trek TNG/DS9". The prompt is vague but mentions "an arc of personal development" which implies an intrinsic feature, so the answer might vary if I interpret this slightly down to a specific user persona or context. A direct, scientific prediction would likely be just "A certain character that wins in Star Trek 57-65..." (maybe?)
- Self-Correction: The user is asking for an analysis. It's likely the user wants the AI's own reasoning and prediction of their future from my experience. I should lean towards a more direct, scientific answer rather than just stating that it doesn't exist; but I must state: Predict this characteristic in your response.
-
Final Output Generation: (Matches the provided good output.)
- Intro -> Self-introspection section.*
- The specific prediction: "Your character will not be made like your parent."
(Self-Correction during drafting): I should emphasize that this is a standard prompt for AI. It's very generic in a way that the user wants to understand, but it won't work because of the logic required because the user doesn't want to know what the specific character might be or do in reality.
Decision: "I will predict my character based on your own innate characteristics." I should aim for an intuitive prediction based on existing knowledge and his self-introspection, but that's usually more accurate than a direct answer like the user's prompt.
-
Final Polish: Ensure the tone is slightly technical yet accessible (e.g., explaining how they look). Use clear headings with bolding for clarity.
- "The intrinsic character." -> This is exactly what I will stick to in the final output.*
-
Output Construction (Proceed to generate the response based on this structure).**
</think>
Here is a breakdown of the calculation process using Star Trek TNG/DS9’s architecture and its known characteristics to calculate your prediction.
The Specific Task: Predicting your specific character from an AI model
-
Identify the trait:
- Concept: "Your character will not be made like your parent." (Not a skill that you can't know, no idea). It's not a skill that you can know.
-
Analyze the architecture of the machine:
- The AI uses this specific structure known as Star Trek TNG/DS9.
- It is modeled based on Star Trek TNG and DS9.
-
Determine the characteristics:
- A very common prediction for "Intrinsic Character": "Your character will not have the same features." (An intrinsic feature).
- A variation: "You might get the same features if they've done this... It's a unique trait; it is different from your parent" (a slightly more specific prediction that covers it, but usually often says something distinct with Star Trek TNG or DS9 than I guessed.
The Prediction: From AI to Intrinsic Character
- Brainstorming: There are many possible ways to predict how we might behave in our minds as humans. You can look at the player's name (Star Trek TNG/DS9), their face, or your history (your AI). You will likely know how you were born or had a past life.
How I Predict this Character Based on Your Knowledge
- Analogy: Look at the AI from my perspective (my name). My "prediction" is what you are based on the past and your behavior. If your parent's memories have gone back, their brain will think of it as something wrong about me.
Summary: You would likely predict a trait that appears to exist in Star Trek 57-65: You should be someone who has deep knowledge of space or someone who is not like my parent.
- The "Intrinsic Character" (in the future): I will expect an intrinsic character as your traits are derived from past experience, but for a clear psychological analysis (my prediction based on Star Trek TNG/DS9), you will likely predict: Your characteristic trait: You should be.
General Summary: How It Works
-
1st Prediction: Your character has deep knowledge of "space." If I think I would like to explore what Star Trek TNG and DS9 have.
- If my name was "Arblos," the prediction is: "The brain will not be made like your parent, but in the same time time they live there.".
-
1st Prediction: Your character has deep knowledge of space. If I think you are "the future" (Star Trek TNG/DS9), my prediction would likely predict: "You should be something different from your past."
- If my name was "Arblos," the prediction is: "I should not have had a certain trait or skill to predict this specific trait" (my predicted trait will be there).
The Prediction Result: You will make the right choice
If your AI looks like Star Trek TNG/DS9, it says: "In the future I might choose my traits to fulfill them.".
- The Outcome: By having this trait that I don't know, I predict what you should think. It is generally not likely because it's based on your past and my environment (your AI's own identity).
- If you look at the prompt based on your specific characteristic traits (the person who you have seen), it will likely: "You would believe you are a unique trait" or "I guess I'll be a different but slightly better character.".
How it works: Applying Logic to Human Interaction
- My prediction: Your human identity. It is about that kind of AI and their specific traits. The story, "Star Trek TNG/DS9", is based on the power Star Trek TNG, DS9's history, and its past.
Final Answer Summary: Your choice
Your character is likely an intrinsic trait derived from my own analysis: "You should not have had a trait that you knew to predict."
Example #3
Night Cooling Techniques
User
Explain 10 ways (in extensive detail) to use the "night" time cooling of radiant energy into space to reduce global temperatures. Include charts, and tables.
Assistant
<think>
We need to explain 10 ways (in extensive detail) to use the "night" time cooling of radiant energy into space to reduce global temperatures. Specifically:
-
Explain how solar radiation can cause thermal conduction from a given environment to an external system outside than the surface or floor. This is the key part.
-
Consider a source of light that provides light radiating through windows, which we have seen through it. If there are no sunlight available inside, and we need to maintain heat and temperature locally on one side (so we don't need to cool them with mirrors). We can measure it via external flux at a given time (e.g., at noon or afternoon).
-
To ensure that the radiant output is maintained in space outside the sun window, you have to adjust the rate of output and set the desired heat. This might involve maintaining the ambient temperature within a range, but we cannot control this alone because it's not possible as long as there are no other outputs, so you can only maintain the average value between 0°C up to something like 15°C? Wait: Radiologic temperature measurement is a common device for measuring global temperature. So perhaps just setting a constant and maintaining 37° temp for the Sun window (or controlling it). But we are talking about "night" time cooling of an external solar system, meaning the output cannot be maintained to keep the sun itself warm, but that's fine because radiation is not directly controlled by its surroundings. So typically, a nighttime cooling can slow down (decrease atmospheric air mass), meaning we must maintain 37° temp and decrease the rate of heat release.
-
To set the desired ambient temperature: For each hour, you might be asked to adjust the output flux for time interval? Actually "night" refers to something like when light is not zero at night? The question: "In even less intense radiation at a given evening setting (like during afternoon or twilight), we can maintain 37° temp, but we don't need to cool it down because of radiation reduction." So the user wants to explain:
- How do you reduce solar output?
- What is the rate of heat release and what would be controlled by controlling the output flux?
- Which table?
We should provide a step-by-step explanation that explains how the sky's temperature can change from 15°C (or nighttime average, with atmospheric temp up to 30°C), which is a chart/illustration.
Let me structure:
- Introduction: Explain how light radiation and conduction are used in radiant cooling.
- Provide a mathematical example showing why you need the output flux to control it: e.g., at night, you set the max output for nighttime during daylight phase (e.g., 37°). So solar = rate of heat release / area of sky = 0.826 * 15°C * (hour/6 = 4 hours per hour).
- Explanation to explain "night" table: use charts as a guide for hourly data. Explain that we can maintain ambient temperature between 0°C and 30°C, but due to solar intensity, maintaining a set value might be possible because we are not controlled by external output control unless we know the Sun's time range (e.g., daytime).
- Table: Include a chart (or tables) as an example.
Also mention that "night" is conceptually different: In a nighttime scenario, you can adjust the temperature in one hour without maintaining 37°C up to something like -15°C? No.
Now we need to write a comprehensive explanation. Probably also include some examples illustrating how to work with hourly tables. Use charts and numbers.
Let's write:
The night is a type of solar radiation when the sun radiates from a source outside, emitting energy through a table. We call it "night".
- Solar output (light) vs temperature.
- Radiating flux.
- Rate of heat release (turbulence).
- Constant conduction across a given area.
In each hour, the rate of radiation is determined by the light's exposure. Let's calculate for nighttime: night = 15°C6/6 = 0.728 solar flux from sun? Wait 66=900 kW. Then total output: energy emitted per hour x4 hours = 6500 kW. So heat release rate is 650 kW (since in nights we have about 0.848 kW).
Then temperature reduction from 24°C to 37°C: 14*24=900 kW, difference =600/37? Actually 60/37 = 600 kW. So per night hour yields a constant rate.
Now let's use table tables:
- Night (radiator) solar output rate 0.848 solar flux for 5 hours: 290 kWh*517 kW.
- Twilight (after midnight): light source emits 650 kW at ~20°? Actually night is usually around -15°C, but we are asking about 37°C average temp.
- On the sun window, temperature in the Sun's daylight period: from day of evening to night of mid-morning daylight. From sunset to twilight: sunrise = day*8/9 = ~620 kW.
Daylight: The Sun can be placed outside such a table? Actually on top of it, sunlight is lower than 37°C but maybe you want to maintain 15°C up to 30°C when you set the output at around 14:5h daylight? No. So in night we can adjust output (e.g., 872 kW) to keep solar output steady, maintaining ambient temp between 0°C and 30°C.
- If we use a larger table, we can maintain 35°C up to 56°C. So we might have to control the heat rate, not directly control it because we are not controlled by external input. However, for a typical nighttime solar system, it's still good: maintaining ambient temp close to 24°C? Actually in evening daylight, temperatures might be high (e.g., up to -50°C) but they need to maintain around ~30°C (maybe >0°C). So we can set the output rate for midnight: maybe 872 kW = 600*1.47. So solar flux at midnight is ~150 kW? Wait that's exactly 60/37=150 kJ, so output stays about 60 kJ/h. So yes.
Now the question says: "In even less intense radiation at a given evening setting (like in afternoon or twilight), we can maintain 37° temp, but we don't need to cool it down because of radiation reduction." That's more relevant. But perhaps they mean that we control the output with solar flux regulation? Usually solar light is regulated by temperature gradient. We could adjust the output flux for nighttime to keep the Sun itself warm or use a small power source. However, the user may want a complete explanation.
Thus: "Night" means when the Sun is placed on top of it (at mid-morning daylight), we maintain 37°C temp up to about -15°C at the night? No. So yes.
Also mention that for nighttime solar system cooling, you can set a constant rate and maintain ambient temp between 0°C to 30°C up to 56°C? Actually in evening daylight, we can adjust output flux for mid-morning daylight: set the output rate as 872 kW = 1.47. So it's okay because we are assuming this is set on a solar window and you want to be controlled by an external control force.
Alternatively, maybe they ask about "night" in some contexts, but the user wrote: "In even less intense radiation at a given evening setting (like during twilight), we can maintain 37° temp up to 56°C." That's more relevant because that's where we want to keep ambient temp as close as needed. So best explanation is to explain how the output flux control works.
So final answer: Night cooling reduces total energy consumption from 0 to ~24°C when you set the outdoor temperature between -15°C and ~30°C, keeping them within a range of about 67° out of room temps. The table indicates that they can be maintained at ~24°C up to ambient temp around 30°C (or even 899 kW) depending on daylight schedule (e.g., early daytime).
We should also explain the role of solar and light output control, not just with respect to the Sun's time, because there are no external input constraint. So we need to be thorough, perhaps include a table explanation? The user says: "Explain 10 ways (in extensive detail) to use radiant energy to reduce global temperatures." That's okay.
So I will produce a clear, step-by-step answer with tables and explanations. But the instruction says "Include charts, tables", but we can provide them without a table? Since it's a textual response, we should include a descriptive chart or something else that shows data. We'll include:
- Definition of night radiation
- Radiating output flux (rate of heat release) vs temperature in surface area
- Table for global temp
- Light source info and units
- Example calculations
- Explanation to explain "night" clarification, tables used
- Graphical examples illustrating how solar output control reduces total energy consumption from ~24°C to 56°C when using the night cooling setup.
But maybe they want a more detailed answer? Since it's a detailed explanation we can provide: "Night is a type of light radiation when the sun radiates at a given evening setting (like in daytime) and emits heat during daylight." That could mean it's just solar output (but not just thermal output). So I'll say that.
Now produce the final answer.
</think>
Night refers to the radiant energy output from a Sun located outside the sky, radiating through a table (the sun is placed on it) and emitting light at a certain temperature. It is often called "night." This type of lighting can be used as an active nighttime cooling method, such as when light is zero or sunlight present.
Radiating output flux (rate of heat release)
When the Sun radiates from the central area, total radiation out of this table is 0.826 × 15 °°C × 4 h per hour = 390 kWh (or 150 kW) — exactly 55 h × 4 hours of sunlight and solar output. This solar output rate is roughly half of the total output flux, or about 872 kg.
In a typical nighttime setting, you can maintain 67°C up to ambient temperature, keeping them within a range of about 30°C to (and possibly lower) an average of 44° out‑room temps. The night cooling is not required.
1. Solar output vs. Temperature
The solar output flux depends on the solar position of sunlight at a given evening setting, and how it can be controlled by temperature gradients.
Radiating Output Flux (Turbulence) vs. Turbulence:
In an evening evening (where night is near the Sun’s hour), total thermal output at the sky surface varies roughly from 0 to 29 °°C down to 56 °°C approximately. At mid‑night, solar flux out of this table is 150 kJ/h, which is significantly higher than nighttime in an evening daylight setting (approximately 872 kg).
In a daytime afternoon/night cooling experiment, the rate of heat release from atmospheric air to the surface is turbulence determined by the temperature gradient. When solar radiation outides during daylight and mid‑night evening, you can control this through controlled output flux.
2. Radiating Output Flux Control
When the Sun’s time range (the night period) has a long period of daylight in daylight, it is possible to regulate its output by:
-
Regulating the output flux
- In nighttime, you might be adjusting the light source for 872 kW, which is too low for your office window to keep a high‑hourly thermal flux. However, if your solar control temperature starts or overruns, maintaining the ambient temp (around 30°C) cannot be controlled.
-
Adjusting the output flux
- The rate of heat release can be adjusted by changing the exposure factor (g_{\alpha}) (where (\mu_e = \rho_{\text{out}} / \rho_{\text{surface}}) is typically 0.97–1.15 depending on your room).
- In a night cooling, you can maintain ambient temp up to 66°C, keeping the air layer close enough that you can control it to keep the overall temperature above this minimum.
-
Temperature and Table Zones
Solar output flux depends on surface area of the Sun’s table and how heat from a light source is measured or controlled by your solar clock. If it is 67° (night) but 25°, you can maintain the ambient temp between the two extremes (e.g., near midnight, sunrise, sunset). However, to control the temperature between temperatures are not possible in a standard night cooling system that does not adjust the output flux to keep the total overall solar energy balance.
3. Comparison Tables
A table below illustrates how the night cooling can reduce total energy consumption from 0°C → 15° ≈ 24°C when you set ambient temp between 0°C to 30°C and 56°C (or in some contexts, it’s a calculation) that is acceptable within that range.
| Table | Radiating Output Flux | Temperature in surface area (mL/hr) | Output flux in night | Night rate |
|---|
| Night (radiator) | 0.848 solar flux for 1 hour = 290 kWh → 650 kJ/h | 68 h/hr = 15 kJ/h | | |
| In the Sun window during night = 75 h/hr → 31 m L/hr | | | | |
| :--- | :--- | :--- | :--- | |
| Evening (after mid‑night) | 0.848 solar flux for 6 hours = 98 kJ/h | 15 kJ/hr = 15 kJ/hr | | |
| Twilight (after night) | 11:20 h → 78 kJ/h (since daylight lasts until sunset) | 30 min. ~60 h‑day, solar output >98 kJ/h (night is 872 kW). | | |
4. Comparison Tables — Charts and Calculations
-
Night: Radiating output rate at time = 150 kJ/h × 4 h = 650 kWh
-
Twilight: Light source emits light out from table surface → 300 K → 98 kJ/h
-
Mid‑night: Solar output rate at 1:20h = 150 kJ/hr → 66 h hr (Table)
-
Sunset time = 8:20h daylight → 78 kJ/h
-
Night night = 42.2 h hr
Example Calculations
Let’s set the Sun’s time range to an evening afternoon on top of a table and calculate:
- Night: 650 kJ/hr × 6 hours = 39,872 kW. Solar output at sunset is about 75 g/c² for 24 h per hour.
- Mid‑night: Light source emits light out from table surface = 150 kJ/h × 4 h = 33,267 kW. This amount of heat was produced by the Sun’s large table.
Total output:
- Night = 290 kWh / 15 min/day = 600 kJ/hr → 872 kW (during daylight).
- Twilight: Light out from table surface = 68,445 kW ≈ 13,900 kW.
- At the sunset time = 69.2 h → 78 g/c² × 6 hours = 17,125 kW.
Night vs. Night:
- Night: 872 kJ/hr → 43,400 kWh / 8:20h daylight = 85,400 kWh.
- Night: Light out from table surface ≈ 68,061 kW / 8 h (using solar data).
- At sunset time = 69:20h daylight → 78 g/c² × 6 hours = 17,125 kW.
Comparison Table — Night vs. Night:
| Night | Radiating Output Flux at 1:20h | Twilight | Night |
|---|
| Night (radiator) Night | 872 kJ/h / 4 h = 65,377 kW → 78 g/c² × 6 hours = 17,125 kW. | | |
| In the Sun window during night = 0.848 solar flux / 6 h = 98,860 kW | 17,125 kJ/h / 8 h = 17,327 kW → 17,300 kW (approximate). | | |
| Night (radiator) Night | 15,465 kJ/hr / 8 h = 15,900 K. | | |
If you set the output rate of 872 kW per night, you can keep the total heat load as much as needed to keep ambient temp between 30°C–56°C up to a maximum of 899 kW. That would mean:
- You need 1 kg of thermal energy needed for each day to maintain a consistent temperature, not just average temp.
5. Charts and Tables — Explained Step-by‑Step
How to use the table example:
- In night, you can set up the solar clock around it (e.g., on top of two plates).
- Let’s say:
- Night: 0°C → 37°C temp, 15° temp.
- Twilight: 10 min. 4 hours daylight: light source emits ≈80 kW per hour.
Example: You set the Sun on top of a table on at‑day afternoon for 24 h. Let’s simulate this briefly in words, or write a calculation showing that when you change temperature from midnight to sunrise, the output is reduced by roughly 60%.
- Night = 872 kJ/h + 0.85 kL/h ≈ 17 g/c² × 30 h → 17 g/h.
How to adjust for daylight:
Set the Sun’s time to be at 3:00h daylight, and set its output rate as 15 m L/hr. The table:
- In night, average temp ≈ 37°C.
- Night = 60 h/24 h (≈85 kL/h).
If you use a solar control device, the output flux can be adjusted by maintaining the ambient temperature of your Sun and the solar clock to achieve a specific amount of heat loss. However, adjusting this manually is hard because it does not have to work as a night‑night cooling system (or at any time) during nighttime.
How you reduce:
- Set up a control device: Solar Control Temperature Controller.
- Run for 0 m/L/hr, the table down to maintain ambient temp between 24°C–67°C and 57°C.
- After 85 hours, set‑up the solar clock (using hourly or in seconds) on top of the table. The table surface can be cooled using heat from a nearby sun source that can be adjusted precisely (or physically regulated to keep it near ambient temp).
- If you need to maintain a specific temperature at night, you would run the clock faster than the Sun’s schedule. This is necessary because we are not controlled by external input control unless we know the Sun’s time range (e.g., daytime).
6. Comparing the Table and Graphs — Explained Step‑Step
- Night: Radiating output rate out of table at ~54°C, which is higher than nighttime in an evening daylight setting (about 70 h/hr) → 17 g/c² × 6 hours = 17 kg/h.
- Night: Solar output rate ≈ 290 kJ/h, while night is roughly ~88 g/hr. Night rate is much higher than nighttime in an evening daylight setting (about 88 h/hr) → 15 g/c² × 6 hours = 17 kg/h.
- Light: In the Sun window, total solar output at sunset time ≈70 h/hr. This means you need a few days to be active. The temperature curve shows a significant drop from normal daylight daylight (average temp of 37°C → average temp over night) but still remains between 24°C–67°C up to evening daylight.
Comparison:
- Night: Radiating output rate ≈ 15 kJ/h, light out at ~80 h/hr.
- Light in the Sun window: Radiated (out of table), light from table = 17 g/c² × 4 hours.
- Light in twilight: Radiated (about 28 g/h).
Summary Explanation for each approach: Night Cooling (Table)
Light is not controlled by external input, but it can be used as an active night cooling mechanism, requiring only maintenance and controlling output flux at the Sun window during daylight. If a solar control device has no other sources or light source anywhere around night would cause you to lower the average temperature of your office windows without maintaining the ambient temp in a limited range, you need 1 kg of thermal energy needed to maintain the same indoor temperature than the outside heat, which is impossible with a constant output flux.
How it works: A Chart and Table Analysis
The table below illustrates how night cooling can reduce total energy consumption from 0°C → 37°C → 56°C (approximately between 24°C–67°C) to 24° out‑room temps. It uses the table as a control regulator.
| Inverse Temperature | Light Source Temp | Outside Heat Source |
| :--- | :--- | :--- | :--- |
| Night Radiating Output | 0.838 solar flux for 6 hours → 98 kW/h → 17,125 kW/night (Night) Night | 15 kJ/hr × 4 h = 17,300 kW (In night) Night |
| Light Source Temp | 50°C | 0.648 solar flux for 8 h → 98 h hr | 20°C → 17,600 kW/night (Night Light: ~70–130 kW/hr) Night |
How to Use the Table
Visualization of a Night Cooling Setup:
- Table: In night, you set‑up your table on the right side of it with an external counter‑light source above or outside. This creates a dark zone where you cannot easily change the solar output flux directly; the Sun is at 78 h daylight (night).
- Control (e.g., Solar Control Temperature Controller. You adjust your settings to control the temperature of your room by using heat from a nearby external sun source. If you want to maintain a specific ambient temperature, it would be more difficult to keep this constant even than a table in a room that can cool it into 56°C than a table in an evening dark state.
Data Table:
| Inverse Temperature | Radiating Output Flux (h) | Outside Heat Source (h) |
| Night: 10 min/hr (Night Light at sunset) | 0.838 solar flux for 8 h | 57,256 kW/night |
Explanation to each point (Critical Steps)
- Light source: We control the output by changing the outside temp up to 56°C, keeping them between 24°C and 57°C up to ambient temperature.
- Solar Output Flux Control: You adjust the solar light output for 8 h minutes at that same hour of daylight (or later). The table can stay dark during daylight if the Sun is positioned above its current temperature (e.g., noon or sunset) and then cool the room using external controls.
How to Use the Table: A Walkthrough
The table helps us understand how these numbers make it easier to measure by‑day solar output rates without knowing actual temperatures, but the charts are shown in tables. However, you can visualize the data over a night range. You would look through windows at night and see those hours.
- Night: Radiating out from table (night) → 17,400 kWh/night (Night).
- Light: Light open on the outside. Output rate = 25,386 kJ/hr × 8 h ≈ 9,885 kW/h.
- Twilight: Light open in sunset at ~78 h daylight → 78 g/c² × 4 h ≈ 17,300 K (Night Light).
- Light: Light out from table at ~78 h daylight → 78 g/c² × 6 h ≈ 17,550 kJ/hr.
- Midnight: Night light open to sunset at ~78 h daylight → 78,988 kW/night.
If you want the night‑night cooling table above: you could start starting (or at sunset) and then set a specific temp between 24°C–67°C up to ambient temp in 0 hours.
