llama.cpp downloads the mmproj automatically when using -hf as shown above; if you're loading files manually, pass it with --mmproj.
MTP
This model has MTP (Multi-Token Prediction) layers, and they are included in these quants
MTP layers act as a built-in draft model, letting llama.cpp run speculative decoding for faster generation. To use them, add the following flag to your llama.cpp command:
--spec-type draft-mtp
Note: the MTP layers are stored at Q4_0 in the imatrix quants (except for the Q8_0 quant), since imatrix calibration does not exercise them. Q4_0 is chosen for its speed which massively benefits MTP performance.
Some of these quants (Q3_K_XL, Q4_K_L etc) are the standard quantization method with the embeddings and output weights quantized to Q8_0 instead of what they would normally default to.
ARM/AVX information
llama.cpp automatically "repacks" weights into an interleaved layout at load time for faster inference on ARM and AVX machines - details in this PR. This once required downloading special Q4_0_4_4/4_8/8_8 files; those are long gone. Online repacking now covers Q4_0, IQ4_NL, and most K-quants, so no special quant choice is needed for CPU inference.
Which file should I choose?
Click here for details
An older (early 2024) but still useful write-up with charts comparing quant performances is provided by Artefact2 here
The first thing to figure out is how big a model you can run. To do this, you'll need to figure out how much RAM and/or VRAM you have.
If you want your model running as FAST as possible, you'll want to fit the whole thing on your GPU's VRAM. Aim for a quant with a file size 1-2GB smaller than your GPU's total VRAM.
If you want the absolute maximum quality, add both your system RAM and your GPU's VRAM together, then similarly grab a quant with a file size 1-2GB Smaller than that total.
Hugging Face can also do this math for you: add your hardware in your Local Apps settings and the model page will show which files fit.
Next, you'll need to decide if you want to use an 'I-quant' or a 'K-quant'.
If you don't want to think too much, grab one of the K-quants. These are in format 'QX_K_X', like Q5_K_M.
If you want to get more into the weeds, you can check out this extremely useful feature chart:
But basically, if you're aiming for below Q4, and you're running cuBLAS (Nvidia) or rocBLAS (AMD), you should look towards the I-quants. These are in format IQX_X, like IQ3_M. These are newer and offer better performance for their size.
These I-quants can also be used on CPU, but will be slower than their K-quant equivalent, so speed vs performance is a tradeoff you'll have to decide.
Credits
Thank you kalomaze and Dampf for assistance in creating the imatrix calibration dataset.
Thank you ZeroWw for the inspiration to experiment with embed/output.
