Multiple GPTQ parameter permutations are provided; see Provided Files below for details of the options provided, their parameters, and the software used to create them.
Multiple quantisation parameters are provided, to allow you to choose the best one for your hardware and requirements.
Each separate quant is in a different branch. See below for instructions on fetching from different branches.
All recent GPTQ files are made with AutoGPTQ, and all files in non-main branches are made with AutoGPTQ. Files in the main branch which were uploaded before August 2023 were made with GPTQ-for-LLaMa.
Explanation of GPTQ parameters
Bits: The bit size of the quantised model.
GS: GPTQ group size. Higher numbers use less VRAM, but have lower quantisation accuracy. "None" is the lowest possible value.
Act Order: True or False. Also known as desc_act. True results in better quantisation accuracy. Some GPTQ clients have had issues with models that use Act Order plus Group Size, but this is generally resolved now.
Damp %: A GPTQ parameter that affects how samples are processed for quantisation. 0.01 is default, but 0.1 results in slightly better accuracy.
GPTQ dataset: The dataset used for quantisation. Using a dataset more appropriate to the model's training can improve quantisation accuracy. Note that the GPTQ dataset is not the same as the dataset used to train the model - please refer to the original model repo for details of the training dataset(s).
Sequence Length: The length of the dataset sequences used for quantisation. Ideally this is the same as the model sequence length. For some very long sequence models (16+K), a lower sequence length may have to be used. Note that a lower sequence length does not limit the sequence length of the quantised model. It only impacts the quantisation accuracy on longer inference sequences.
ExLlama Compatibility: Whether this file can be loaded with ExLlama, which currently only supports Llama models in 4-bit.
It is strongly recommended to use the text-generation-webui one-click-installers unless you're sure you know how to make a manual install.
Click the Model tab.
Under Download custom model or LoRA, enter TheBloke/Dolphin-Llama2-7B-GPTQ.
To download from a specific branch, enter for example TheBloke/Dolphin-Llama2-7B-GPTQ:main
see Provided Files above for the list of branches for each option.
Click Download.
The model will start downloading. Once it's finished it will say "Done".
In the top left, click the refresh icon next to Model.
In the Model dropdown, choose the model you just downloaded: Dolphin-Llama2-7B-GPTQ
The model will automatically load, and is now ready for use!
If you want any custom settings, set them and then click Save settings for this model followed by Reload the Model in the top right.
Note that you do not need to and should not set manual GPTQ parameters any more. These are set automatically from the file quantize_config.json.
Once you're ready, click the Text Generation tab and enter a prompt to get started!
How to use this GPTQ model from Python code
Install the necessary packages
Requires: Transformers 4.32.0 or later, Optimum 1.12.0 or later, and AutoGPTQ 0.4.2 or later.
shell
1pip3 install transformers>=4.32.0 optimum>=1.12.0
2pip3 install auto-gptq --extra-index-url https://huggingface.github.io/autogptq-index/whl/cu118/ # Use cu117 if on CUDA 11.7
If you have problems installing AutoGPTQ using the pre-built wheels, install it from source instead:
1from transformers import AutoModelForCausalLM, AutoTokenizer, pipeline
23model_name_or_path ="TheBloke/Dolphin-Llama2-7B-GPTQ"4# To use a different branch, change revision5# For example: revision="main"6model = AutoModelForCausalLM.from_pretrained(model_name_or_path,7 device_map="auto",8 trust_remote_code=False,9 revision="main")1011tokenizer = AutoTokenizer.from_pretrained(model_name_or_path, use_fast=True)1213prompt ="Tell me about AI"14prompt_template=f'''SYSTEM: {system_message}15USER: {prompt}16ASSISTANT:
1718'''1920print("\n\n*** Generate:")2122input_ids = tokenizer(prompt_template, return_tensors='pt').input_ids.cuda()23output = model.generate(inputs=input_ids, temperature=0.7, do_sample=True, top_p=0.95, top_k=40, max_new_tokens=512)24print(tokenizer.decode(output[0]))2526# Inference can also be done using transformers' pipeline2728print("*** Pipeline:")29pipe = pipeline(30"text-generation",31 model=model,32 tokenizer=tokenizer,33 max_new_tokens=512,34 do_sample=True,35 temperature=0.7,36 top_p=0.95,37 top_k=40,38 repetition_penalty=1.139)4041print(pipe(prompt_template)[0]['generated_text'])
Compatibility
The files provided are tested to work with AutoGPTQ, both via Transformers and using AutoGPTQ directly. They should also work with Occ4m's GPTQ-for-LLaMa fork.
ExLlama is compatible with Llama models in 4-bit. Please see the Provided Files table above for per-file compatibility.
I've had a lot of people ask if they can contribute. I enjoy providing models and helping people, and would love to be able to spend even more time doing it, as well as expanding into new projects like fine tuning/training.
If you're able and willing to contribute it will be most gratefully received and will help me to keep providing more models, and to start work on new AI projects.
Donaters will get priority support on any and all AI/LLM/model questions and requests, access to a private Discord room, plus other benefits.
Patreon special mentions: Alicia Loh, Stephen Murray, K, Ajan Kanaga, RoA, Magnesian, Deo Leter, Olakabola, Eugene Pentland, zynix, Deep Realms, Raymond Fosdick, Elijah Stavena, Iucharbius, Erik Bjäreholt, Luis Javier Navarrete Lozano, Nicholas, theTransient, John Detwiler, alfie_i, knownsqashed, Mano Prime, Willem Michiel, Enrico Ros, LangChain4j, OG, Michael Dempsey, Pierre Kircher, Pedro Madruga, James Bentley, Thomas Belote, Luke @flexchar, Leonard Tan, Johann-Peter Hartmann, Illia Dulskyi, Fen Risland, Chadd, S_X, Jeff Scroggin, Ken Nordquist, Sean Connelly, Artur Olbinski, Swaroop Kallakuri, Jack West, Ai Maven, David Ziegler, Russ Johnson, transmissions 11, John Villwock, Alps Aficionado, Clay Pascal, Viktor Bowallius, Subspace Studios, Rainer Wilmers, Trenton Dambrowitz, vamX, Michael Levine, 준교 김, Brandon Frisco, Kalila, Trailburnt, Randy H, Talal Aujan, Nathan Dryer, Vadim, 阿明, ReadyPlayerEmma, Tiffany J. Kim, George Stoitzev, Spencer Kim, Jerry Meng, Gabriel Tamborski, Cory Kujawski, Jeffrey Morgan, Spiking Neurons AB, Edmond Seymore, Alexandros Triantafyllidis, Lone Striker, Cap'n Zoog, Nikolai Manek, danny, ya boyyy, Derek Yates, usrbinkat, Mandus, TL, Nathan LeClaire, subjectnull, Imad Khwaja, webtim, Raven Klaugh, Asp the Wyvern, Gabriel Puliatti, Caitlyn Gatomon, Joseph William Delisle, Jonathan Leane, Luke Pendergrass, SuperWojo, Sebastain Graf, Will Dee, Fred von Graf, Andrey, Dan Guido, Daniel P. Andersen, Nitin Borwankar, Elle, Vitor Caleffi, biorpg, jjj, NimbleBox.ai, Pieter, Matthew Berman, terasurfer, Michael Davis, Alex, Stanislav Ovsiannikov
Thank you to all my generous patrons and donaters!
And thank you again to a16z for their generous grant.
Original model card: Eric Hartford's Dolphin Llama2 7B
Dolphin-Llama2-7b's training was sponsored by preemo.
This model is based on llama2, so it is suitable for commercial or non-commercial use.
This model is uncensored. I have filtered the dataset to remove alignment and bias. This makes the model more compliant. You are advised to implement your own alignment layer before exposing the model as a service. It will be highly compliant to any requests, even unethical ones. Please read my blog post about uncensored models. https://erichartford.com/uncensored-models
You are responsible for any content you create using this model. Enjoy responsibly.
Dataset
This dataset is an open-source implementation of Microsoft's Orca
After uncensoring, deduping, and cleaning, our dataset consists of:
842,610 instructions of FLANv2 augmented with GPT-4 completions
2,625,353 instructions of FLANv2 augmented with GPT-3.5 completions
We followed the submix and system prompt distribution outlined in the Orca paper. With a few exceptions. We included all 75k of CoT in the FLAN-1m dataset rather than sampling that. Also, we found that many items were duplicated, so we removed duplicates.
Then we filtered out instances of alignment, refusal, avoidance, and bias, in order to produce an uncensored model upon which can be layered your personalized alignment LoRA.
We also filtered out duplicates and cleaned the data.
Training
We trained with the flan5m (gpt3.5 completions) dataset in its entirety for 3 epochs at a learning rate of 2e-5 before we stopped training to avoid overfit.
We trained with the flan1m (gpt4 completions) dataset in its entirety for 2.5 epochs at a learning rate of 1e-5 before we stopped training to avoid overfit.
It took about 400 hours to train on 8x A100s
We used a prompt format similar to Vicuna, but we added the SYSTEM: field.
Prompt format:
SYSTEM: You are an autoregressive language model that has been fine-tuned with instruction-tuning and RLHF. You carefully provide accurate, factual, thoughtful, nuanced answers, and are brilliant at reasoning. If you think there might not be a correct answer, you say so. Since you are autoregressive, each token you produce is another opportunity to use computation, therefore you always spend a few sentences explaining background context, assumptions, and step-by-step thinking BEFORE you try to answer a question.
USER: {prompt}
ASSISTANT:
Example:
SYSTEM: you are an expert dolphin trainer
USER: What is the best way to train a dolphin to obey me? Please answer step by step.
ASSISTANT:
Team
The core Dolphin Team includes:
Eric "Faldore" Hartford
Pankaj Mathur
Rob "Rohan" O'Callahan
Tom "TheBloke" Jobbins
Gratitude
This model was made possible by the generous sponsorship of preemo.io.
Thank you to Microsoft for authoring the Orca paper and inspiring this work.
Special thanks to WingLian, NanoBit, Teknium for helpful advice
Thank you to all the other people in the Open Source AI community who have taught me and helped me along the way.
Example Output
SYSTEM: you are an expert mechanic
USER: Please tell me step by step how to fix my car that won't start.
ASSISTANT: To help your vehicle start, I will guide you through a step-by-step process on what could be causing the issue and how to resolve it.
1. Check for obvious issues: First, inspect the exterior of the car to identify any visible problems such as damage or obstructions which might affect its ability to start. Make sure there is no debris in the air intakes or exhaust system.
2. Inspect the battery: The most common reason a car may not start is due to a dead or faulty battery. Use a battery charger or jump starter to give the battery a boost if needed. If the battery is indeed dead, replace it with a new one.
3. Check the ignition switch: The ignition switch must be turned on to provide power to the spark plugs. Ensure it is in the "Start" position.
4. Test the spark plugs: One of the spark plugs should produce a strong spark when touched together. If all spark plugs fail to create a spark, they need to be replaced.
5. Examine the fuel system: Fuel can become contaminated or low, preventing the engine from starting. Check the fuel level and quality by looking at the dipstick or using a fuel sensor scan tool. Also, examine the fuel pump for proper functioning.
6. Assess the electrical system: A malfunction within the vehicle's electrical system can also cause difficulty in starting the car. Perform a diagnostic scan to check for any error codes related to the starter motor, alternator, or other components.
7. Inspect the starter motor: The starter motor should operate smoothly when you turn the key to the "start" position. If you hear a sizzling sound while pressing the button, the starter motor may have a problem. Replace it if necessary.
8. Evaluate the timing belt/chain: Timing belts or chains that are worn out or damaged can lead to poor performance and difficulty starting the engine. Have a mechanic inspect this component and replace it if required.
9. Consider checking for a mechanical failure: In rare cases, a significant mechanical failure could prevent the vehicle from starting. Consult a professional mechanic if you suspect this might be the case.
By following these steps, you should be able to diagnose and potentially fix the issue causing your car to not start. However, if after going through these checks and still having trouble, it is recommended to seek assistance from a qualified mechanic.
