A 16-bit floating-point format designed for faster computation while retaining good precision.
Provides similar dynamic range as FP32 but with lower memory usage.
Recommended if your hardware supports BF16 acceleration (check your device’s specs).
Ideal for high-performance inference with reduced memory footprint compared to FP32.

📌 Use BF16 if:
✔ Your hardware has native BF16 support (e.g., newer GPUs, TPUs).
✔ You want higher precision while saving memory.
✔ You plan to requantize the model into another format.

📌 Avoid BF16 if:
❌ Your hardware does not support BF16 (it may fall back to FP32 and run slower).
❌ You need compatibility with older devices that lack BF16 optimization.

F16 (Float 16) – More widely supported than BF16

A 16-bit floating-point high precision but with less of range of values than BF16.
Works on most devices with FP16 acceleration support (including many GPUs and some CPUs).
Slightly lower numerical precision than BF16 but generally sufficient for inference.

📌 Use F16 if:
✔ Your hardware supports FP16 but not BF16.
✔ You need a balance between speed, memory usage, and accuracy.
✔ You are running on a GPU or another device optimized for FP16 computations.

📌 Avoid F16 if:
❌ Your device lacks native FP16 support (it may run slower than expected).
❌ You have memory limitations.

Quantized Models (Q4_K, Q6_K, Q8, etc.) – For CPU & Low-VRAM Inference

Quantization reduces model size and memory usage while maintaining as much accuracy as possible.

Lower-bit models (Q4_K) → Best for minimal memory usage, may have lower precision.
Higher-bit models (Q6_K, Q8_0) → Better accuracy, requires more memory.

📌 Use Quantized Models if:
✔ You are running inference on a CPU and need an optimized model.
✔ Your device has low VRAM and cannot load full-precision models.
✔ You want to reduce memory footprint while keeping reasonable accuracy.

📌 Avoid Quantized Models if:
❌ You need maximum accuracy (full-precision models are better for this).
❌ Your hardware has enough VRAM for higher-precision formats (BF16/F16).

Very Low-Bit Quantization (IQ3_XS, IQ3_S, IQ3_M, Q4_K, Q4_0)

These models are optimized for extreme memory efficiency, making them ideal for low-power devices or large-scale deployments where memory is a critical constraint.

IQ3_XS: Ultra-low-bit quantization (3-bit) with extreme memory efficiency.
- Use case: Best for ultra-low-memory devices where even Q4_K is too large.
- Trade-off: Lower accuracy compared to higher-bit quantizations.
IQ3_S: Small block size for maximum memory efficiency.
- Use case: Best for low-memory devices where IQ3_XS is too aggressive.
IQ3_M: Medium block size for better accuracy than IQ3_S.
- Use case: Suitable for low-memory devices where IQ3_S is too limiting.
Q4_K: 4-bit quantization with block-wise optimization for better accuracy.
- Use case: Best for low-memory devices where Q6_K is too large.
Q4_0: Pure 4-bit quantization, optimized for ARM devices.
- Use case: Best for ARM-based devices or low-memory environments.

Summary Table: Model Format Selection

Model Format	Precision	Memory Usage	Device Requirements	Best Use Case
BF16	Highest	High	BF16-supported GPU/CPUs	High-speed inference with reduced memory
F16	High	High	FP16-supported devices	GPU inference when BF16 isn’t available
Q4_K	Medium Low	Low	CPU or Low-VRAM devices	Best for memory-constrained environments
Q6_K	Medium	Moderate	CPU with more memory	Better accuracy while still being quantized
Q8_0	High	Moderate	CPU or GPU with enough VRAM	Best accuracy among quantized models
IQ3_XS	Very Low	Very Low	Ultra-low-memory devices	Extreme memory efficiency and low accuracy
Q4_0	Low	Low	ARM or low-memory devices	llama.cpp can optimize for ARM devices

Included Files & Details

`rwkv7-1.5B-world-bf16.gguf`

Model weights preserved in BF16.
Use this if you want to requantize the model into a different format.
Best if your device supports BF16 acceleration.

`rwkv7-1.5B-world-f16.gguf`

Model weights stored in F16.
Use if your device supports FP16, especially if BF16 is not available.

`rwkv7-1.5B-world-bf16-q8_0.gguf`

Output & embeddings remain in BF16.
All other layers quantized to Q8_0.
Use if your device supports BF16 and you want a quantized version.

`rwkv7-1.5B-world-f16-q8_0.gguf`

Output & embeddings remain in F16.
All other layers quantized to Q8_0.

`rwkv7-1.5B-world-q4_k.gguf`

Output & embeddings quantized to Q8_0.
All other layers quantized to Q4_K.
Good for CPU inference with limited memory.

`rwkv7-1.5B-world-q4_k_s.gguf`

Smallest Q4_K variant, using less memory at the cost of accuracy.
Best for very low-memory setups.

`rwkv7-1.5B-world-q6_k.gguf`

Output & embeddings quantized to Q8_0.
All other layers quantized to Q6_K .

`rwkv7-1.5B-world-q8_0.gguf`

Fully Q8 quantized model for better accuracy.
Requires more memory but offers higher precision.

`rwkv7-1.5B-world-iq3_xs.gguf`

IQ3_XS quantization, optimized for extreme memory efficiency.
Best for ultra-low-memory devices.

`rwkv7-1.5B-world-iq3_m.gguf`

IQ3_M quantization, offering a medium block size for better accuracy.
Suitable for low-memory devices.

`rwkv7-1.5B-world-q4_0.gguf`

Pure Q4_0 quantization, optimized for ARM devices.
Best for low-memory environments.
Prefer IQ4_NL for better accuracy.

🚀 If you find these models useful

Please click like ❤ . Also I’d really appreciate it if you could test my Network Monitor Assistant at 👉 Network Monitor Assitant.

💬 Click the chat icon (bottom right of the main and dashboard pages) . Choose a LLM; toggle between the LLM Types TurboLLM -> FreeLLM -> TestLLM.

What I'm Testing

I'm experimenting with function calling against my network monitoring service. Using small open source models. I am into the question "How small can it go and still function".

🟡 TestLLM – Runs the current testing model using llama.cpp on 6 threads of a Cpu VM (Should take about 15s to load. Inference speed is quite slow and it only processes one user prompt at a time—still working on scaling!). If you're curious, I'd be happy to share how it works! .

The other Available AI Assistants

🟢 TurboLLM – Uses gpt-4o-mini Fast! . Note: tokens are limited since OpenAI models are pricey, but you can Login or Download the Quantum Network Monitor agent to get more tokens, Alternatively use the TestLLM .

🔵 HugLLM – Runs open-source Hugging Face models Fast, Runs small models (≈8B) hence lower quality, Get 2x more tokens (subject to Hugging Face API availability)

Final Word

I fund the servers used to create these model files, run the Quantum Network Monitor service, and pay for inference from Novita and OpenAI—all out of my own pocket. All the code behind the model creation and the Quantum Network Monitor project is open source. Feel free to use whatever you find helpful.

If you appreciate the work, please consider buying me a coffee ☕. Your support helps cover service costs and allows me to raise token limits for everyone.

I'm also open to job opportunities or sponsorship.

Thank you! 😊

rwkv7-1.5B-world

This is RWKV-7 model under flash-linear attention format.

Model Details

Model Description

Developed by: Bo Peng, Yu Zhang, Songlin Yang, Ruichong Zhang
Funded by: RWKV Project (Under LF AI & Data Foundation)
Model type: RWKV7
Language(s) (NLP): English
License: Apache-2.0
Parameter count: 1.52B
Tokenizer: RWKV World tokenizer
Vocabulary size: 65,536

Model Sources

Repository: https://github.com/fla-org/flash-linear-attention ; https://github.com/BlinkDL/RWKV-LM
Paper: With in Progress

Uses

Install flash-linear-attention and the latest version of transformers before using this model:

bash

pip install git+https://github.com/fla-org/flash-linear-attention
pip install 'transformers>=4.48.0'

Direct Use

You can use this model just as any other HuggingFace models:

python

from transformers import AutoModelForCausalLM, AutoTokenizer
model = AutoModelForCausalLM.from_pretrained('fla-hub/rwkv7-1.5B-world', trust_remote_code=True)
tokenizer = AutoTokenizer.from_pretrained('fla-hub/rwkv7-1.5B-world', trust_remote_code=True)

model = model.cuda()
prompt = "What is a large language model?"
messages = [
    {"role": "user", "content": "Who are you?"},
    {"role": "assistant", "content": "I am a GPT-3 based model."},
    {"role": "user", "content": prompt}
]
text = tokenizer.apply_chat_template(
    messages,
    tokenize=False,
    add_generation_prompt=True
)

model_inputs = tokenizer([text], return_tensors="pt").to(model.device)

generated_ids = model.generate(
    **model_inputs,
    max_new_tokens=1024,
)
generated_ids = [
    output_ids[len(input_ids):] for input_ids, output_ids in zip(model_inputs.input_ids, generated_ids)
]

response = tokenizer.batch_decode(generated_ids, skip_special_tokens=False)[0]
print(response)

Training Details

Training Data

This model is trained on the World v3 with a total of 3.119 trillion tokens.

Training Hyperparameters

Training regime: bfloat16, lr 4e-4 to 1e-5 "delayed" cosine decay, wd 0.1 (with increasing batch sizes during the middle)
Final Loss: 1.9965
Token Count: 3.119 trillion

Evaluation

Metrics

lambada_openai:

before conversion: ppl 4.13 acc 69.4%

after conversion: ppl 4.26 acc 68.8% (without apply temple)

FAQ

Q: safetensors metadata is none.

A: upgrade transformers to >=4.48.0: pip install 'transformers>=4.48.0'

Mungert/rwkv7-1.5B-world-GGUF

rwkv7-1.5B-world GGUF Models

Choosing the Right Model Format

BF16 (Brain Float 16) – Use if BF16 acceleration is available