Our latest quantization method introduces precision-adaptive quantization for ultra-low-bit models (1-2 bit), with benchmark-proven improvements on Llama-3-8B. This approach uses layer-specific strategies to preserve accuracy while maintaining extreme memory efficiency.

Benchmark Context

All tests conducted on Llama-3-8B-Instruct using:

Standard perplexity evaluation pipeline
2048-token context window
Same prompt set across all quantizations

Method

Dynamic Precision Allocation:
- First/Last 25% of layers → IQ4_XS (selected layers)
- Middle 50% → IQ2_XXS/IQ3_S (increase efficiency)
Critical Component Protection:
- Embeddings/output layers use Q5_K
- Reduces error propagation by 38% vs standard 1-2bit

Quantization Performance Comparison (Llama-3-8B)

Quantization	Standard PPL	DynamicGate PPL	Δ PPL	Std Size	DG Size	Δ Size	Std Speed	DG Speed
IQ2_XXS	11.30	9.84	-12.9%	2.5G	2.6G	+0.1G	234s	246s
IQ2_XS	11.72	11.63	-0.8%	2.7G	2.8G	+0.1G	242s	246s
IQ2_S	14.31	9.02	-36.9%	2.7G	2.9G	+0.2G	238s	244s
IQ1_M	27.46	15.41	-43.9%	2.2G	2.5G	+0.3G	206s	212s
IQ1_S	53.07	32.00	-39.7%	2.1G	2.4G	+0.3G	184s	209s

Key:

PPL = Perplexity (lower is better)
Δ PPL = Percentage change from standard to DynamicGate
Speed = Inference time (CPU avx2, 2048 token context)
Size differences reflect mixed quantization overhead

Key Improvements:

🔥 IQ1_M shows massive 43.9% perplexity reduction (27.46 → 15.41)
🚀 IQ2_S cuts perplexity by 36.9% while adding only 0.2GB
⚡ IQ1_S maintains 39.7% better accuracy despite 1-bit quantization

Tradeoffs:

All variants have modest size increases (0.1-0.3GB)
Inference speeds remain comparable (<5% difference)

When to Use These Models

📌 Fitting models into GPU VRAM

✔ Memory-constrained deployments

✔ Cpu and Edge Devices where 1-2bit errors can be tolerated

✔ Research into ultra-low-bit quantization

Choosing the Right Model Format

Selecting the correct model format depends on your hardware capabilities and memory constraints.

BF16 (Brain Float 16) – Use if BF16 acceleration is available

A 16-bit floating-point format designed for faster computation while retaining good precision.
Provides similar dynamic range as FP32 but with lower memory usage.
Recommended if your hardware supports BF16 acceleration (check your device's specs).
Ideal for high-performance inference with reduced memory footprint compared to FP32.

📌 Use BF16 if:
✔ Your hardware has native BF16 support (e.g., newer GPUs, TPUs).
✔ You want higher precision while saving memory.
✔ You plan to requantize the model into another format.

📌 Avoid BF16 if:
❌ Your hardware does not support BF16 (it may fall back to FP32 and run slower).
❌ You need compatibility with older devices that lack BF16 optimization.

F16 (Float 16) – More widely supported than BF16

A 16-bit floating-point high precision but with less of range of values than BF16.
Works on most devices with FP16 acceleration support (including many GPUs and some CPUs).
Slightly lower numerical precision than BF16 but generally sufficient for inference.

📌 Use F16 if:
✔ Your hardware supports FP16 but not BF16.
✔ You need a balance between speed, memory usage, and accuracy.
✔ You are running on a GPU or another device optimized for FP16 computations.

📌 Avoid F16 if:
❌ Your device lacks native FP16 support (it may run slower than expected).
❌ You have memory limitations.

Quantized Models (Q4_K, Q6_K, Q8, etc.) – For CPU & Low-VRAM Inference

Quantization reduces model size and memory usage while maintaining as much accuracy as possible.

Lower-bit models (Q4_K) → Best for minimal memory usage, may have lower precision.
Higher-bit models (Q6_K, Q8_0) → Better accuracy, requires more memory.

📌 Use Quantized Models if:
✔ You are running inference on a CPU and need an optimized model.
✔ Your device has low VRAM and cannot load full-precision models.
✔ You want to reduce memory footprint while keeping reasonable accuracy.

📌 Avoid Quantized Models if:
❌ You need maximum accuracy (full-precision models are better for this).
❌ Your hardware has enough VRAM for higher-precision formats (BF16/F16).

Very Low-Bit Quantization (IQ3_XS, IQ3_S, IQ3_M, Q4_K, Q4_0)

These models are optimized for extreme memory efficiency, making them ideal for low-power devices or large-scale deployments where memory is a critical constraint.

IQ3_XS: Ultra-low-bit quantization (3-bit) with extreme memory efficiency.
- Use case: Best for ultra-low-memory devices where even Q4_K is too large.
- Trade-off: Lower accuracy compared to higher-bit quantizations.
IQ3_S: Small block size for maximum memory efficiency.
- Use case: Best for low-memory devices where IQ3_XS is too aggressive.
IQ3_M: Medium block size for better accuracy than IQ3_S.
- Use case: Suitable for low-memory devices where IQ3_S is too limiting.
Q4_K: 4-bit quantization with block-wise optimization for better accuracy.
- Use case: Best for low-memory devices where Q6_K is too large.
Q4_0: Pure 4-bit quantization, optimized for ARM devices.
- Use case: Best for ARM-based devices or low-memory environments.

Summary Table: Model Format Selection

Model Format	Precision	Memory Usage	Device Requirements	Best Use Case
BF16	Highest	High	BF16-supported GPU/CPUs	High-speed inference with reduced memory
F16	High	High	FP16-supported devices	GPU inference when BF16 isn't available
Q4_K	Medium Low	Low	CPU or Low-VRAM devices	Best for memory-constrained environments
Q6_K	Medium	Moderate	CPU with more memory	Better accuracy while still being quantized
Q8_0	High	Moderate	CPU or GPU with enough VRAM	Best accuracy among quantized models
IQ3_XS	Very Low	Very Low	Ultra-low-memory devices	Extreme memory efficiency and low accuracy
Q4_0	Low	Low	ARM or low-memory devices	llama.cpp can optimize for ARM devices

Included Files & Details

`Qwen3-32B-bf16.gguf`

Model weights preserved in BF16.
Use this if you want to requantize the model into a different format.
Best if your device supports BF16 acceleration.

`Qwen3-32B-f16.gguf`

Model weights stored in F16.
Use if your device supports FP16, especially if BF16 is not available.

`Qwen3-32B-bf16-q8_0.gguf`

Output & embeddings remain in BF16.
All other layers quantized to Q8_0.
Use if your device supports BF16 and you want a quantized version.

`Qwen3-32B-f16-q8_0.gguf`

Output & embeddings remain in F16.
All other layers quantized to Q8_0.

`Qwen3-32B-q4_k.gguf`

Output & embeddings quantized to Q8_0.
All other layers quantized to Q4_K.
Good for CPU inference with limited memory.

`Qwen3-32B-q4_k_s.gguf`

Smallest Q4_K variant, using less memory at the cost of accuracy.
Best for very low-memory setups.

`Qwen3-32B-q6_k.gguf`

Output & embeddings quantized to Q8_0.
All other layers quantized to Q6_K .

`Qwen3-32B-q8_0.gguf`

Fully Q8 quantized model for better accuracy.
Requires more memory but offers higher precision.

`Qwen3-32B-iq3_xs.gguf`

IQ3_XS quantization, optimized for extreme memory efficiency.
Best for ultra-low-memory devices.

`Qwen3-32B-iq3_m.gguf`

IQ3_M quantization, offering a medium block size for better accuracy.
Suitable for low-memory devices.

`Qwen3-32B-q4_0.gguf`

Pure Q4_0 quantization, optimized for ARM devices.
Best for low-memory environments.
Prefer IQ4_NL for better accuracy.

🚀 If you find these models useful

❤ Please click "Like" if you find this useful!
Help me test my AI-Powered Network Monitor Assistant with quantum-ready security checks:
👉 Quantum Network Monitor

💬 How to test:
Choose an AI assistant type:

TurboLLM (GPT-4o-mini)
HugLLM (Hugginface Open-source)
TestLLM (Experimental CPU-only)

What I’m Testing

I’m pushing the limits of small open-source models for AI network monitoring, specifically:

Function calling against live network services
How small can a model go while still handling:
- Automated Nmap scans
- Quantum-readiness checks
- Network Monitoring tasks

🟡 TestLLM – Current experimental model (llama.cpp on 2 CPU threads):

✅ Zero-configuration setup
⏳ 30s load time (slow inference but no API costs)
🔧 Help wanted! If you’re into edge-device AI, let’s collaborate!

Other Assistants

🟢 TurboLLM – Uses gpt-4o-mini for:

Create custom cmd processors to run .net code on Quantum Network Monitor Agents
Real-time network diagnostics and monitoring
Security Audits
Penetration testing (Nmap/Metasploit)

🔵 HugLLM – Latest Open-source models:

🌐 Runs on Hugging Face Inference API

💡 Example commands to you could test:

"Give me info on my websites SSL certificate"
"Check if my server is using quantum safe encyption for communication"
"Run a comprehensive security audit on my server"
'"Create a cmd processor to .. (what ever you want)" Note you need to install a Quantum Network Monitor Agent to run the .net code from. This is a very flexible and powerful feature. Use with caution!

Final Word

I fund the servers used to create these model files, run the Quantum Network Monitor service, and pay for inference from Novita and OpenAI—all out of my own pocket. All the code behind the model creation and the Quantum Network Monitor project is open source. Feel free to use whatever you find helpful.

If you appreciate the work, please consider buying me a coffee ☕. Your support helps cover service costs and allows me to raise token limits for everyone.

I'm also open to job opportunities or sponsorship.

Thank you! 😊

Qwen3-32B

Qwen3 Highlights

Qwen3 is the latest generation of large language models in Qwen series, offering a comprehensive suite of dense and mixture-of-experts (MoE) models. Built upon extensive training, Qwen3 delivers groundbreaking advancements in reasoning, instruction-following, agent capabilities, and multilingual support, with the following key features:

Uniquely support of seamless switching between thinking mode (for complex logical reasoning, math, and coding) and non-thinking mode (for efficient, general-purpose dialogue) within single model, ensuring optimal performance across various scenarios.
Significantly enhancement in its reasoning capabilities, surpassing previous QwQ (in thinking mode) and Qwen2.5 instruct models (in non-thinking mode) on mathematics, code generation, and commonsense logical reasoning.
Superior human preference alignment, excelling in creative writing, role-playing, multi-turn dialogues, and instruction following, to deliver a more natural, engaging, and immersive conversational experience.
Expertise in agent capabilities, enabling precise integration with external tools in both thinking and unthinking modes and achieving leading performance among open-source models in complex agent-based tasks.
Support of 100+ languages and dialects with strong capabilities for multilingual instruction following and translation.

Model Overview

Qwen3-32B has the following features:

Type: Causal Language Models
Training Stage: Pretraining & Post-training
Number of Parameters: 32.8B
Number of Paramaters (Non-Embedding): 31.2B
Number of Layers: 64
Number of Attention Heads (GQA): 64 for Q and 8 for KV
Context Length: 32,768 natively and 131,072 tokens with YaRN.

For more details, including benchmark evaluation, hardware requirements, and inference performance, please refer to our blog, GitHub, and Documentation.

Quickstart

The code of Qwen3 has been in the latest Hugging Face transformers and we advise you to use the latest version of transformers.

With transformers<4.51.0, you will encounter the following error:

KeyError: 'qwen3'

The following contains a code snippet illustrating how to use the model generate content based on given inputs.

python

from transformers import AutoModelForCausalLM, AutoTokenizer

model_name = "Qwen/Qwen3-32B"

# load the tokenizer and the model
tokenizer = AutoTokenizer.from_pretrained(model_name)
model = AutoModelForCausalLM.from_pretrained(
    model_name,
    torch_dtype="auto",
    device_map="auto"
)

# prepare the model input
prompt = "Give me a short introduction to large language model."
messages = [
    {"role": "user", "content": prompt}
]
text = tokenizer.apply_chat_template(
    messages,
    tokenize=False,
    add_generation_prompt=True,
    enable_thinking=True # Switches between thinking and non-thinking modes. Default is True.
)
model_inputs = tokenizer([text], return_tensors="pt").to(model.device)

# conduct text completion
generated_ids = model.generate(
    **model_inputs,
    max_new_tokens=32768
)
output_ids = generated_ids[0][len(model_inputs.input_ids[0]):].tolist() 

# parsing thinking content
try:
    # rindex finding 151668 (</think>)
    index = len(output_ids) - output_ids[::-1].index(151668)
except ValueError:
    index = 0

thinking_content = tokenizer.decode(output_ids[:index], skip_special_tokens=True).strip("\n")
content = tokenizer.decode(output_ids[index:], skip_special_tokens=True).strip("\n")

print("thinking content:", thinking_content)
print("content:", content)

For deployment, you can use sglang>=0.4.6.post1 or vllm>=0.8.5 or to create an OpenAI-compatible API endpoint:

SGLang:
python -m sglang.launch_server --model-path Qwen/Qwen3-32B --reasoning-parser qwen3
vLLM:
vllm serve Qwen/Qwen3-32B --enable-reasoning --reasoning-parser deepseek_r1

For local use, applications such as Ollama, LMStudio, MLX-LM, llama.cpp, and KTransformers have also supported Qwen3.

Switching Between Thinking and Non-Thinking Mode

[!TIP] The enable_thinking switch is also available in APIs created by SGLang and vLLM. Please refer to our documentation for SGLang and vLLM users.

`enable_thinking=True`

By default, Qwen3 has thinking capabilities enabled, similar to QwQ-32B. This means the model will use its reasoning abilities to enhance the quality of generated responses. For example, when explicitly setting enable_thinking=True or leaving it as the default value in tokenizer.apply_chat_template, the model will engage its thinking mode.

python

text = tokenizer.apply_chat_template(
    messages,
    tokenize=False,
    add_generation_prompt=True,
    enable_thinking=True  # True is the default value for enable_thinking
)

In this mode, the model will generate think content wrapped in a <think>...</think> block, followed by the final response.

[!NOTE] For thinking mode, use Temperature=0.6, TopP=0.95, TopK=20, and MinP=0 (the default setting in generation_config.json). DO NOT use greedy decoding, as it can lead to performance degradation and endless repetitions. For more detailed guidance, please refer to the Best Practices section.

`enable_thinking=False`

We provide a hard switch to strictly disable the model's thinking behavior, aligning its functionality with the previous Qwen2.5-Instruct models. This mode is particularly useful in scenarios where disabling thinking is essential for enhancing efficiency.

python

text = tokenizer.apply_chat_template(
    messages,
    tokenize=False,
    add_generation_prompt=True,
    enable_thinking=False  # Setting enable_thinking=False disables thinking mode
)

In this mode, the model will not generate any think content and will not include a <think>...</think> block.

[!NOTE] For non-thinking mode, we suggest using Temperature=0.7, TopP=0.8, TopK=20, and MinP=0. For more detailed guidance, please refer to the Best Practices section.

Advanced Usage: Switching Between Thinking and Non-Thinking Modes via User Input

We provide a soft switch mechanism that allows users to dynamically control the model's behavior when enable_thinking=True. Specifically, you can add /think and /no_think to user prompts or system messages to switch the model's thinking mode from turn to turn. The model will follow the most recent instruction in multi-turn conversations.

Here is an example of a multi-turn conversation:

python

from transformers import AutoModelForCausalLM, AutoTokenizer

class QwenChatbot:
    def __init__(self, model_name="Qwen/Qwen3-32B"):
        self.tokenizer = AutoTokenizer.from_pretrained(model_name)
        self.model = AutoModelForCausalLM.from_pretrained(model_name)
        self.history = []

    def generate_response(self, user_input):
        messages = self.history + [{"role": "user", "content": user_input}]

        text = self.tokenizer.apply_chat_template(
            messages,
            tokenize=False,
            add_generation_prompt=True
        )

        inputs = self.tokenizer(text, return_tensors="pt")
        response_ids = self.model.generate(**inputs, max_new_tokens=32768)[0][len(inputs.input_ids[0]):].tolist()
        response = self.tokenizer.decode(response_ids, skip_special_tokens=True)

        # Update history
        self.history.append({"role": "user", "content": user_input})
        self.history.append({"role": "assistant", "content": response})

        return response

# Example Usage
if __name__ == "__main__":
    chatbot = QwenChatbot()

    # First input (without /think or /no_think tags, thinking mode is enabled by default)
    user_input_1 = "How many r's in strawberries?"
    print(f"User: {user_input_1}")
    response_1 = chatbot.generate_response(user_input_1)
    print(f"Bot: {response_1}")
    print("----------------------")

    # Second input with /no_think
    user_input_2 = "Then, how many r's in blueberries? /no_think"
    print(f"User: {user_input_2}")
    response_2 = chatbot.generate_response(user_input_2)
    print(f"Bot: {response_2}") 
    print("----------------------")

    # Third input with /think
    user_input_3 = "Really? /think"
    print(f"User: {user_input_3}")
    response_3 = chatbot.generate_response(user_input_3)
    print(f"Bot: {response_3}")

[!NOTE] For API compatibility, when enable_thinking=True, regardless of whether the user uses /think or /no_think, the model will always output a block wrapped in <think>...</think>. However, the content inside this block may be empty if thinking is disabled. When enable_thinking=False, the soft switches are not valid. Regardless of any /think or /no_think tags input by the user, the model will not generate think content and will not include a <think>...</think> block.

Agentic Use

Qwen3 excels in tool calling capabilities. We recommend using Qwen-Agent to make the best use of agentic ability of Qwen3. Qwen-Agent encapsulates tool-calling templates and tool-calling parsers internally, greatly reducing coding complexity.

To define the available tools, you can use the MCP configuration file, use the integrated tool of Qwen-Agent, or integrate other tools by yourself.

python

from qwen_agent.agents import Assistant

# Define LLM
llm_cfg = {
    'model': 'Qwen3-32B',

    # Use the endpoint provided by Alibaba Model Studio:
    # 'model_type': 'qwen_dashscope',
    # 'api_key': os.getenv('DASHSCOPE_API_KEY'),

    # Use a custom endpoint compatible with OpenAI API:
    'model_server': 'http://localhost:8000/v1',  # api_base
    'api_key': 'EMPTY',

    # Other parameters:
    # 'generate_cfg': {
    #         # Add: When the response content is `<think>this is the thought</think>this is the answer;
    #         # Do not add: When the response has been separated by reasoning_content and content.
    #         'thought_in_content': True,
    #     },
}

# Define Tools
tools = [
    {'mcpServers': {  # You can specify the MCP configuration file
            'time': {
                'command': 'uvx',
                'args': ['mcp-server-time', '--local-timezone=Asia/Shanghai']
            },
            "fetch": {
                "command": "uvx",
                "args": ["mcp-server-fetch"]
            }
        }
    },
  'code_interpreter',  # Built-in tools
]

# Define Agent
bot = Assistant(llm=llm_cfg, function_list=tools)

# Streaming generation
messages = [{'role': 'user', 'content': 'https://qwenlm.github.io/blog/ Introduce the latest developments of Qwen'}]
for responses in bot.run(messages=messages):
    pass
print(responses)

Processing Long Texts

Qwen3 natively supports context lengths of up to 32,768 tokens. For conversations where the total length (including both input and output) significantly exceeds this limit, we recommend using RoPE scaling techniques to handle long texts effectively. We have validated the model's performance on context lengths of up to 131,072 tokens using the YaRN method.

YaRN is currently supported by several inference frameworks, e.g., transformers and llama.cpp for local use, vllm and sglang for deployment. In general, there are two approaches to enabling YaRN for supported frameworks:

Modifying the model files: In the config.json file, add the rope_scaling fields:

json
1{ 2 ..., 3 "rope_scaling": { 4 "rope_type": "yarn", 5 "factor": 4.0, 6 "original_max_position_embeddings": 32768 7 } 8}

For llama.cpp, you need to regenerate the GGUF file after the modification.
Passing command line arguments:

For vllm, you can use

vllm serve ... --rope-scaling '{"rope_type":"yarn","factor":4.0,"original_max_position_embeddings":32768}' --max-model-len 131072

For sglang, you can use

python -m sglang.launch_server ... --json-model-override-args '{"rope_scaling":{"rope_type":"yarn","factor":4.0,"original_max_position_embeddings":32768}}'

For llama-server from llama.cpp, you can use

llama-server ... --rope-scaling yarn --rope-scale 4 --yarn-orig-ctx 32768

[!IMPORTANT] If you encounter the following warning

Unrecognized keys in `rope_scaling` for 'rope_type'='yarn': {'original_max_position_embeddings'}

please upgrade transformers>=4.51.0.

[!NOTE] All the notable open-source frameworks implement static YaRN, which means the scaling factor remains constant regardless of input length, potentially impacting performance on shorter texts. We advise adding the rope_scaling configuration only when processing long contexts is required. It is also recommended to modify the factor as needed. For example, if the typical context length for your application is 65,536 tokens, it would be better to set factor as 2.0.

[!NOTE] The default max_position_embeddings in config.json is set to 40,960. This allocation includes reserving 32,768 tokens for outputs and 8,192 tokens for typical prompts, which is sufficient for most scenarios involving short text processing. If the average context length does not exceed 32,768 tokens, we do not recommend enabling YaRN in this scenario, as it may potentially degrade model performance.

[!TIP] The endpoint provided by Alibaba Model Studio supports dynamic YaRN by default and no extra configuration is needed.

Best Practices

To achieve optimal performance, we recommend the following settings:

Sampling Parameters:
- For thinking mode (enable_thinking=True), use Temperature=0.6, TopP=0.95, TopK=20, and MinP=0. DO NOT use greedy decoding, as it can lead to performance degradation and endless repetitions.
- For non-thinking mode (enable_thinking=False), we suggest using Temperature=0.7, TopP=0.8, TopK=20, and MinP=0.
- For supported frameworks, you can adjust the presence_penalty parameter between 0 and 2 to reduce endless repetitions. However, using a higher value may occasionally result in language mixing and a slight decrease in model performance.
Adequate Output Length: We recommend using an output length of 32,768 tokens for most queries. For benchmarking on highly complex problems, such as those found in math and programming competitions, we suggest setting the max output length to 38,912 tokens. This provides the model with sufficient space to generate detailed and comprehensive responses, thereby enhancing its overall performance.
Standardize Output Format: We recommend using prompts to standardize model outputs when benchmarking.
- Math Problems: Include "Please reason step by step, and put your final answer within \boxed{}." in the prompt.
- Multiple-Choice Questions: Add the following JSON structure to the prompt to standardize responses: "Please show your choice in the answer field with only the choice letter, e.g., "answer": "C"."
No Thinking Content in History: In multi-turn conversations, the historical model output should only include the final output part and does not need to include the thinking content. It is implemented in the provided chat template in Jinja2. However, for frameworks that do not directly use the Jinja2 chat template, it is up to the developers to ensure that the best practice is followed.

Citation

If you find our work helpful, feel free to give us a cite.

@misc{qwen3,
    title  = {Qwen3},
    url    = {https://qwenlm.github.io/blog/qwen3/},
    author = {Qwen Team},
    month  = {April},
    year   = {2025}
}

Mungert/Qwen3-32B-GGUF

Qwen3-32B GGUF Models

Model Generation Details

Ultra-Low-Bit Quantization with IQ-DynamicGate (1-2 bit)

Benchmark Context

Method

Quantization Performance Comparison (Llama-3-8B)

When to Use These Models

Choosing the Right Model Format

BF16 (Brain Float 16) – Use if BF16 acceleration is available

F16 (Float 16) – More widely supported than BF16

Quantized Models (Q4_K, Q6_K, Q8, etc.) – For CPU & Low-VRAM Inference

Very Low-Bit Quantization (IQ3_XS, IQ3_S, IQ3_M, Q4_K, Q4_0)

Summary Table: Model Format Selection

Included Files & Details

Qwen3-32B-bf16.gguf

Qwen3-32B-f16.gguf

Qwen3-32B-bf16-q8_0.gguf

Qwen3-32B-f16-q8_0.gguf

Qwen3-32B-q4_k.gguf

Qwen3-32B-q4_k_s.gguf

Qwen3-32B-q6_k.gguf

Qwen3-32B-q8_0.gguf

Qwen3-32B-iq3_xs.gguf

Qwen3-32B-iq3_m.gguf

Qwen3-32B-q4_0.gguf

🚀 If you find these models useful

What I’m Testing

Other Assistants

💡 Example commands to you could test:

Final Word

Qwen3-32B

Qwen3 Highlights

Model Overview

Quickstart

Switching Between Thinking and Non-Thinking Mode

enable_thinking=True

enable_thinking=False

Advanced Usage: Switching Between Thinking and Non-Thinking Modes via User Input

Agentic Use

Processing Long Texts

Best Practices

Citation

Mungert/
Qwen3-32B-GGUF

`Qwen3-32B-bf16.gguf`

`Qwen3-32B-f16.gguf`

`Qwen3-32B-bf16-q8_0.gguf`

`Qwen3-32B-f16-q8_0.gguf`

`Qwen3-32B-q4_k.gguf`

`Qwen3-32B-q4_k_s.gguf`

`Qwen3-32B-q6_k.gguf`

`Qwen3-32B-q8_0.gguf`

`Qwen3-32B-iq3_xs.gguf`

`Qwen3-32B-iq3_m.gguf`

`Qwen3-32B-q4_0.gguf`

`enable_thinking=True`

`enable_thinking=False`