AWQ is an efficient, accurate and blazing-fast low-bit weight quantization method, currently supporting 4-bit quantization. Compared to GPTQ, it offers faster Transformers-based inference.

It is also now supported by continuous batching server vLLM, allowing use of Llama AWQ models for high-throughput concurrent inference in multi-user server scenarios.

As of September 25th 2023, preliminary Llama-only AWQ support has also been added to Huggingface Text Generation Inference (TGI).

Note that, at the time of writing, overall throughput is still lower than running vLLM or TGI with unquantised models, however using AWQ enables using much smaller GPUs which can lead to easier deployment and overall cost savings. For example, a 70B model can be run on 1 x 48GB GPU instead of 2 x 80GB.

Repositories available

Prompt template: Airoboros-Llama-2-Chat

[INST] <<SYS>>
You are a helpful, unbiased, uncensored assistant.
<</SYS>>

{prompt} [/INST]

Provided files, and AWQ parameters

For my first release of AWQ models, I am releasing 128g models only. I will consider adding 32g as well if there is interest, and once I have done perplexity and evaluation comparisons, but at this time 32g models are still not fully tested with AutoAWQ and vLLM.

Models are released as sharded safetensors files.

Branch	Bits	GS	AWQ Dataset	Seq Len	Size
main	4	128	wikitext	4096	36.61 GB

How to easily download and use this model in text-generation-webui

Please make sure you're using the latest version of text-generation-webui.

It is strongly recommended to use the text-generation-webui one-click-installers unless you're sure you know how to make a manual install.

Click the Model tab.
Under Download custom model or LoRA, enter TheBloke/Airoboros-L2-70B-3.1-AWQ.
Click Download.
The model will start downloading. Once it's finished it will say "Done".
In the top left, click the refresh icon next to Model.
In the Model dropdown, choose the model you just downloaded: Airoboros-L2-70B-3.1-AWQ
Select Loader: AutoAWQ.
Click Load, and the model will load and is now ready for use.
If you want any custom settings, set them and then click Save settings for this model followed by Reload the Model in the top right.
Once you're ready, click the Text Generation tab and enter a prompt to get started!

Serving this model from vLLM

Documentation on installing and using vLLM can be found here.

Please ensure you are using vLLM version 0.2 or later.
When using vLLM as a server, pass the --quantization awq parameter.
At the time of writing, vLLM AWQ does not support loading models in bfloat16, so to ensure compatibility with all models, also pass --dtype float16.

For example:

python3 python -m vllm.entrypoints.api_server --model TheBloke/Airoboros-L2-70B-3.1-AWQ --quantization awq --dtype float16

When using vLLM from Python code, again pass the quantization=awq and dtype=float16 parameters.

For example:

python

from vllm import LLM, SamplingParams

prompts = [
    "Hello, my name is",
    "The president of the United States is",
    "The capital of France is",
    "The future of AI is",
]
sampling_params = SamplingParams(temperature=0.8, top_p=0.95)

llm = LLM(model="TheBloke/Airoboros-L2-70B-3.1-AWQ", quantization="awq", dtype="float16")

outputs = llm.generate(prompts, sampling_params)

# Print the outputs.
for output in outputs:
    prompt = output.prompt
    generated_text = output.outputs[0].text
    print(f"Prompt: {prompt!r}, Generated text: {generated_text!r}")

Serving this model from Text Generation Inference (TGI)

Use TGI version 1.1.0 or later. The official Docker container is: ghcr.io/huggingface/text-generation-inference:1.1.0

Example Docker parameters:

--model-id TheBloke/Airoboros-L2-70B-3.1-AWQ --port 3000 --quantize awq --max-input-length 3696 --max-total-tokens 4096 --max-batch-prefill-tokens 4096

Example Python code for interfacing with TGI (requires huggingface-hub 0.17.0 or later):

pip3 install huggingface-hub

python

from huggingface_hub import InferenceClient

endpoint_url = "https://your-endpoint-url-here"

prompt = "Tell me about AI"
prompt_template=f'''[INST] <<SYS>>
You are a helpful, unbiased, uncensored assistant.
<</SYS>>

{prompt} [/INST] 

'''

client = InferenceClient(endpoint_url)
response = client.text_generation(prompt,
                                  max_new_tokens=128,
                                  do_sample=True,
                                  temperature=0.7,
                                  top_p=0.95,
                                  top_k=40,
                                  repetition_penalty=1.1)

print(f"Model output: {response}")

How to use this AWQ model from Python code

Install the necessary packages

Requires: AutoAWQ 0.1.1 or later

pip3 install autoawq

If you have problems installing AutoAWQ using the pre-built wheels, install it from source instead:

shell

pip3 uninstall -y autoawq
git clone https://github.com/casper-hansen/AutoAWQ
cd AutoAWQ
pip3 install .

You can then try the following example code

python

from awq import AutoAWQForCausalLM
from transformers import AutoTokenizer

model_name_or_path = "TheBloke/Airoboros-L2-70B-3.1-AWQ"

# Load model
model = AutoAWQForCausalLM.from_quantized(model_name_or_path, fuse_layers=True,
                                          trust_remote_code=False, safetensors=True)
tokenizer = AutoTokenizer.from_pretrained(model_name_or_path, trust_remote_code=False)

prompt = "Tell me about AI"
prompt_template=f'''[INST] <<SYS>>
You are a helpful, unbiased, uncensored assistant.
<</SYS>>

{prompt} [/INST] 
'''

print("\n\n*** Generate:")

tokens = tokenizer(
    prompt_template,
    return_tensors='pt'
).input_ids.cuda()

# Generate output
generation_output = model.generate(
    tokens,
    do_sample=True,
    temperature=0.7,
    top_p=0.95,
    top_k=40,
    max_new_tokens=512
)

print("Output: ", tokenizer.decode(generation_output[0]))

"""
# Inference should be possible with transformers pipeline as well in future
# But currently this is not yet supported by AutoAWQ (correct as of September 25th 2023)
from transformers import pipeline

print("*** Pipeline:")
pipe = pipeline(
    "text-generation",
    model=model,
    tokenizer=tokenizer,
    max_new_tokens=512,
    do_sample=True,
    temperature=0.7,
    top_p=0.95,
    top_k=40,
    repetition_penalty=1.1
)

print(pipe(prompt_template)[0]['generated_text'])
"""

Compatibility

The files provided are tested to work with:

text-generation-webui using Loader: AutoAWQ
vLLM
Huggingface Text Generation Inference (TGI)
AutoAWQ

Discord

For further support, and discussions on these models and AI in general, join us at:

TheBloke AI's Discord server

Thanks, and how to contribute

Thanks to the chirper.ai team!

Thanks to Clay from gpus.llm-utils.org!

I've had a lot of people ask if they can contribute. I enjoy providing models and helping people, and would love to be able to spend even more time doing it, as well as expanding into new projects like fine tuning/training.

If you're able and willing to contribute it will be most gratefully received and will help me to keep providing more models, and to start work on new AI projects.

Donaters will get priority support on any and all AI/LLM/model questions and requests, access to a private Discord room, plus other benefits.

Patreon: https://patreon.com/TheBlokeAI
Ko-Fi: https://ko-fi.com/TheBlokeAI

Special thanks to: Aemon Algiz.

Patreon special mentions: Pierre Kircher, Stanislav Ovsiannikov, Michael Levine, Eugene Pentland, Andrey, 준교 김, Randy H, Fred von Graf, Artur Olbinski, Caitlyn Gatomon, terasurfer, Jeff Scroggin, James Bentley, Vadim, Gabriel Puliatti, Harry Royden McLaughlin, Sean Connelly, Dan Guido, Edmond Seymore, Alicia Loh, subjectnull, AzureBlack, Manuel Alberto Morcote, Thomas Belote, Lone Striker, Chris Smitley, Vitor Caleffi, Johann-Peter Hartmann, Clay Pascal, biorpg, Brandon Frisco, sidney chen, transmissions 11, Pedro Madruga, jinyuan sun, Ajan Kanaga, Emad Mostaque, Trenton Dambrowitz, Jonathan Leane, Iucharbius, usrbinkat, vamX, George Stoitzev, Luke Pendergrass, theTransient, Olakabola, Swaroop Kallakuri, Cap'n Zoog, Brandon Phillips, Michael Dempsey, Nikolai Manek, danny, Matthew Berman, Gabriel Tamborski, alfie_i, Raymond Fosdick, Tom X Nguyen, Raven Klaugh, LangChain4j, Magnesian, Illia Dulskyi, David Ziegler, Mano Prime, Luis Javier Navarrete Lozano, Erik Bjäreholt, 阿明, Nathan Dryer, Alex, Rainer Wilmers, zynix, TL, Joseph William Delisle, John Villwock, Nathan LeClaire, Willem Michiel, Joguhyik, GodLy, OG, Alps Aficionado, Jeffrey Morgan, ReadyPlayerEmma, Tiffany J. Kim, Sebastain Graf, Spencer Kim, Michael Davis, webtim, Talal Aujan, knownsqashed, John Detwiler, Imad Khwaja, Deo Leter, Jerry Meng, Elijah Stavena, Rooh Singh, Pieter, SuperWojo, Alexandros Triantafyllidis, Stephen Murray, Ai Maven, ya boyyy, Enrico Ros, Ken Nordquist, Deep Realms, Nicholas, Spiking Neurons AB, Elle, Will Dee, Jack West, RoA, Luke @flexchar, Viktor Bowallius, Derek Yates, Subspace Studios, jjj, Toran Billups, Asp the Wyvern, Fen Risland, Ilya, NimbleBox.ai, Chadd, Nitin Borwankar, Emre, Mandus, Leonard Tan, Kalila, K, Trailburnt, S_X, Cory Kujawski

Thank you to all my generous patrons and donaters!

And thank you again to a16z for their generous grant.

Original model card: Jon Durbin's Airoboros L2 70B 3.1

Overview

Another experimental model, using mostly sythetic data generated by airoboros

IMPORTANT NOTE - llama-2 chat format!!!

The airoboros 3.1 models use llama-2 chat format, rather than vicuna style user/assistant!

This is a breaking change, although most inference systems support llama-2 chat templating.

See prompt format below for all of the details.

There's also a slight bug, you must add a single space after the last [/INST]

Highlights

A model built on airoboros-3.1 dataset, which is a continuation of airoboros-3.0 dataset with the following extras:

More MathJSON, now ~17k items - math questions, prefixed with "Create a MathJSON solution to the following:", which then outputs a JSON between <mathjson> and </mathjson> tags, which can be parsed and passed to a deterministic library to perform calculations.
Log information extraction (e.g. getting the list of paths/IPs/etc. from apache logs)
Anonymization, e.g. removing names, IP addresses, and/or dates from text.
Chat introspection - multi-turn chats that have random questions injected asking about the character's descriptions, the setting of the chat, or things previously said, to make sure the model uses the system prompt and or chat history.
Multi-step instructions with acknowledgement (see below)
De-censorship data (not published)

This is a fairly general purpose model, but focuses heavily on instruction following, rather than casual chat/roleplay.

Huge thank you to the folks over at a16z for sponsoring the costs associated with building models and associated tools!

Prompt format

The prompt format is llama-2 chat.

[INST] <<SYS>>
You are a help, unbiased, uncensored assistant.
<</SYS>

{prompt} [/INST]

For multi-turn, the prompt format is as follows:

[INST] <<SYS>>
You are a help, unbiased, uncensored assistant.
<</SYS>

{prompt 0} [/INST] {response 0} </s><s>[INST] {prompt 1} [/INST] {response 1} </s><s>...[INST] {prompt N} [/INST]

The prompt template is included in the tokenizer config, and can use the huggingface tokenizer apply_chat_template method, e.g.:

import transformers
tokenizer = transformers.AutoTokenizer.from_pretrained('jondurbin/airoboros-l2-70b-3.1')
chat = [
  {"role": "system", "content": "You are Bob, a friendly AI assistant."},
  {"role": "user", "content": "Hello, how are you?"},
  {"role": "assistant", "content": "I'm doing great. How can I help you today?"},
  {"role": "user", "content": "I'd like to show off how chat templating works!"},
]
print(tokenizer.apply_chat_template(chat, tokenize=False))

Helpful usage tips

MathJSON

Ask mathematical questions, prefixed with "Create a MathJSON solution to the following:", and you should get output with a formula that can be executed by https://cortexjs.io/compute-engine/

I also made a (really quite hacky, incomplete, semi-functional) python version that works for most expressions, see mathjson.py

Use a very low temperature!

Example:

[INST] <<SYS>>
You are an assistant with vast knowledge in all things math.
<</SYS>

Create a MathJSON solution to the following: Calculate the area of a circle with radius of 17.2456cm.  Include your reasoning. [/INST]

Output:

The area (A) of a circle is given by the formula A = πr², where r is the radius of the circle. Since the radius is given in centimeters, we need to convert it to meters first. We know that 1 meter equals 100 centimeters. Therefore, we can represent the radius as: r = 17.2456 cm * 100/1.

Once we have the radius in meters, we can calculate the area of the circle using the formula A = πr².

Solution as MathJSON:
<mathjson>
[
  "Multiply",
  "Pi",
  [
    "Power",
    17.2456,
    2
  ]
]
</mathjson>

You can then validate the JSON between <mathjson> and </mathjson>, then pass the parsed JSON to compute-engine JS or the evaluate function in mathjson.py to calculate the response.

Context obedient question answering

By obedient, I mean the model was trained to ignore what it thinks it knows, and uses the context to answer the question. The model was also tuned to limit the values to the provided context as much as possible to reduce hallucinations.

The format for a closed-context prompt is as follows:

BEGININPUT
BEGINCONTEXT
[key0: value0]
[key1: value1]
... other metdata ...
ENDCONTEXT
[insert your text blocks here]
ENDINPUT
[add as many other blocks, in the exact same format]
BEGININSTRUCTION
[insert your instruction(s).  The model was tuned with single questions, paragraph format, lists, etc.]
ENDINSTRUCTION

It's also helpful to add "Don't make up answers if you don't know." to your instruction block to make sure if the context is completely unrelated it doesn't make something up.

The only prompts that need this closed context formating are closed-context instructions. Normal questions/instructions do not!

I know it's a bit verbose and annoying, but after much trial and error, using these explicit delimiters helps the model understand where to find the responses and how to associate specific sources with it.

BEGININPUT - denotes a new input block
BEGINCONTEXT - denotes the block of context (metadata key/value pairs) to associate with the current input block
ENDCONTEXT - denotes the end of the metadata block for the current input
[text] - Insert whatever text you want for the input block, as many paragraphs as can fit in the context.
ENDINPUT - denotes the end of the current input block
[repeat as many input blocks in this format as you want]
BEGININSTRUCTION - denotes the start of the list (or one) instruction(s) to respond to for all of the input blocks above.
[instruction(s)]
ENDINSTRUCTION - denotes the end of instruction set

It sometimes works without ENDINSTRUCTION, but by explicitly including that in the prompt, the model better understands that all of the instructions in the block should be responded to.

Use a very low temperature!

Here's a trivial, but important example to prove the point:

BEGININPUT
BEGINCONTEXT
date: 2021-01-01
url: https://web.site/123
ENDCONTEXT
In a shocking turn of events, blueberries are now green, but will be sticking with the same name.
ENDINPUT
BEGININSTRUCTION
What color are bluberries?  Source?
ENDINSTRUCTION

And the response:

Blueberries are now green.
Source:
date: 2021-01-01
url: https://web.site/123

Summarization

500 samples have been included from this dataset, using the same format as contextual question answering, for example:

BEGININPUT
{text to summarize}
ENDINPUT
BEGININSTRUCTION
Summarize the input in around 130 words.
ENDINSTRUCTION

Getting longer responses

You can use a few techniques to get longer responses.

Detailed prompts, with explicit instruction for word count:

Please compose a narrative set in the heart of an ancient library, steeped in the scent of old parchment and ink. The protagonist should be a young scholar who is dedicated to studying the art of storytelling and its evolution throughout history. In her pursuit of knowledge, she stumbles upon a forgotten tome that seems to possess an unusual aura. This book has the ability to bring stories to life, literally manifesting characters and scenarios from within its pages into reality.

The main character must navigate through various epochs of storytelling - from oral traditions of tribal societies, through medieval minstrels' tales, to modern-day digital narratives - as they come alive around her. Each era presents its unique challenges and lessons about the power and impact of stories on human civilization.

One such character could be a sentient quill pen, who was once used by renowned authors of yesteryears and now holds their wisdom and experiences. It becomes her mentor, guiding her through this journey with witty remarks and insightful commentary.

Ensure that your tale encapsulates the thrill of adventure, the beauty of learning, and the profound connection between humans and their stories. All characters involved should be non-human entities. Feel free to explore creative liberties but maintain the mentioned elements.

Your response should be approximately 2300 words.

Or, a simpler example:

Please create a long, detailed story about a dragon in an old growth forest who, for some reason, begins speaking the words of the source code of linux.

There are a few examples of next chapter completion as well, e.g.:

Write the next chapter of a historical fiction novel set in Paris during the 20th century.

Here's a summary of the previous chapter:
In the vibrant city of Paris, amid the tumultuous changes of the 20th century, our protagonist Margot, an aspiring fashion designer, has just secured an apprenticeship at a prestigious couture house. She meets Lucien, a charming journalist who covers the fashion industry. Together they navigate the ever-changing world of fashion and society, uncovering secrets that reveal the intricate links between style, politics, and culture. As the chapter concludes, they decide to delve deeper into the hidden corners of the fashion world to unravel its mysteries.

Requirements for the next chapter:

1. Character Development of Margot and Lucien:
- Margot's Evolution: Unfold more about Margot's past, her dreams of revolutionizing fashion, and her struggle to establish herself in a male-dominated industry. Illustrate her growing expertise, innovative ideas, and increasing dependence on Lucien.
- Lucien's Complexity: Introduce uncertainties surrounding Lucien's background and real motives. Increase suspense by suggesting undisclosed information he possesses, while also highlighting his wit and perceptiveness.

2. Exploration of Paris and the Couture House:
- Paris: Elaborate their journey through the bustling streets of Paris, including encounters with iconic figures, social unrest, and relics from different eras of French history.
- The Couture House: Expand on the grandeur of the couture house they work in, filled with artistic masterpieces, intense competition, and cryptic notes hinting at a scandalous past.

3. Emergence of the Subplot: The Lost Collection:
- Discovery: Have Margot and Lucien stumble upon a secret vault containing a lost collection designed before World War II, raising new questions about the previous owner and the influence of war on fashion.
- Revelation: Capture their shock as they realize the designs were plagiarized, the potential repercussions, and the opportunities it presents for Margot's career.
- Twist: End with a twist that suggests there are other stolen collections across Paris, setting up their new mission.


Your response should be approximately 650 words.

Coding

You can ask for fairly complex coding instructions with multiple criteria, e.g.:

Create a python application with the following requirements:
- Asyncio FastAPI webserver
- ping endpoint that returns the current date in JSON format
- file upload endpoint, which calculates the file's sha256 checksum, and checks postgres to deduplicate

Or inline criteria:

Write a multi-threaded TCP server in C that accepts a "GET [key]" input and "SET [key] [value]" input, and uses a binary tree to get and store the input values.

You can also optionally add a single space and "PLAINFORMAT" at the end of your prompt to avoid backticks, explanations, etc. and just print the code, e.g.:

Write a websocket application in node.js. PLAINFORMAT

Agent/function calling

The dataset includes many examples of function/args generation based on input criteria. This is somewhat similar to the OpenAI function calling, but the output is either JSON or YAML.

Example prompt:

As an AI assistant, please select the most suitable function and parameters from the list of available functions below, based on the user's input. Provide your response in JSON format.

Input: I want to know how many times 'Python' is mentioned in my text file.

Available functions:
file_analytics:
  description: This tool performs various operations on a text file.
  params:
    action: The operation we want to perform on the data, such as "count_occurrences", "find_line", etc.
    filters:
      keyword: The word or phrase we want to search for.

Response:

json

{
  "function": "file_analytics",
  "params": {
    "action": "count_occurrences",
    "filters": {
      "keyword": "Python"
    }
  }
}

Chain-of-thought

You can ask for several possible responses to a given problem, with a ranking and final answer selection.

Example prompt:

A group of people decide to play a round-robin tournament where every player plays every other player exactly once. If a total of 45 games were played, how many players participated in the tournament? Offer several potential answers, rank them according to mathematical logic, and pick the most feasible one.

Example response:

Solution 1:
In a round-robin tournament, each player plays every other player exactly once. This means that the total number of games played is equal to the combination of all players taken two at a time (since a game involves two players). 

The formula for combinations is nC2 = n(n-1)/2, where n is the total number of players. We know that nC2 equals 45 (the total number of games), so we can set up the equation as follows:

n(n-1)/2 = 45

Solving this equation gives us n=10.

Final answer: There were 10 players in the tournament.

Solution 2:
Another way to approach this problem is by using the concept of triangular numbers. Triangular numbers are a sequence of numbers where each number can be represented as a triangle with dots. The nth triangular number is given by the sum of the first n natural numbers. 

If we consider each game as a dot and each player as a side of the triangle, then the total number of games (45) would correspond to the 9th triangular number because 1+2+3+4+5+6+7+8+9=45. However, since each side of the triangle represents a player, and there's one more player than sides in our model (because the last player has no one left to play against), we need to add one more to get the total number of players.

Final answer: There were 10 players in the tournament.

Solution 3:
We could also use trial and error to solve this problem. Starting from a small number of players, we calculate how many games would be played in a round-robin tournament until we reach 45 games. For example, with 2 players, only 1 game is played; with 3 players, 3 games are played; with 4 players, 6 games are played, and so on. Continuing this process, we find that with 10 players, 45 games are played.

Final answer: There were 10 players in the tournament.

Ranking of solutions from best to worst:
1. Solution 1: This solution uses direct mathematical reasoning based on the properties of a round-robin tournament and solves an equation to find the answer.
2. Solution 2: This solution uses the concept of triangular numbers which requires additional steps and knowledge beyond the immediate problem context, but still arrives at the correct answer.
3. Solution 3: This solution relies on trial and error, which is less efficient and reliable than the other methods, but it eventually gets to the right answer.

Best and final answer: There were 10 players in the tournament.

reWOO style execution planning

The model now supports execution planning for complex instructions that would require making use of several tools. The output is just the plan, you must implement a mechanism to parse the output and actually call the functions!

Example prompt:

Please construct a systematic plan to generate an optimal response to the user instruction, utilizing a set of provided tools. Each plan will correspond to an evidence value, which will be the output of one of the available functions given an input string
that could be the user's question, one or more prior evidence values, or a combination of both.

Here are the tools available to be called:
DuckDuckGo[input]: Tool that enables the user to search for information using the DuckDuckGo search engine. This tool is helpful in locating a suitable list of sites that may contain the answer to the user's query. It does not directly answer the question but finds a list of sites that might have the answer.
TextScraper[input]: Load one or more websites from the input string containing newline delimited links, where input is one or more links, and produces plain text output containing the content of the links.
HyperlinkExtractor[input]: Extract links from plain text and produces a plain text, newline delimited response of links.
KnowledgeModel[input]: Question answering language model, particularly useful in answering questions based on an input passage of text. The input must be a text question that references an :evidence[n]: variable, e.g. What color is the cat, given :evidence1:?

The output should be in format:
Plan: [first action to take based on input question]
:evidence0: = [function to call with input parameter]
Plan: [next action to take, based on result of :evidence0:]
:evidence1: = [next function to call and input parameter, which may include reference to previous evidence, e.g. "Given context :evidence0"]
...
Answer: [:evidence[n]: containing the final answer.]

Question: Who won the Nobel Prize in Literature in 2020 and what is their most famous work?

Response:

Plan: Begin by conducting a web search to find out who won the Nobel Prize in Literature in 2020.
:evidence0: = DuckDuckGo[Nobel Prize in Literature 2020 winner]
Plan: Utilize the KnowledgeModel to interpret the search results and find the name of the laureate.
:evidence1: = KnowledgeModel[Who won the Nobel Prize in Literature in 2020, given :evidence0:?]
Plan: Conduct another web search to find the most famous work of the identified laureate.
:evidence2: = DuckDuckGo[Most famous work of :evidence1:]
Plan: Extract the relevant links from the DuckDuckGo search results for a more focused search.
:evidence3: = HyperlinkExtractor[:evidence2:]
Plan: Use the TextScraper tool to extract information from the relevant links.
:evidence4: = TextScraper[:evidence3:]
Plan: Finally, utilize the KnowledgeModel to identify and summarize the most famous work of the laureate from the extracted information.
:evidence5: = KnowledgeModel[What is the most famous work of :evidence1:, given :evidence4:?]
Answer: :evidence5:

For this to be useful, you'd have to parse the output plan text, and implement/call each of the functions. This is just pseudo-code, completely untested off the top of my head, and obviously would requiring full implementation + hardening:

python

import re
import requests

def inject_context(input_text, **context):
    for ref in set(re.findall(r"(:evidence[0-9]+:)", input_text, re.I)):
        input_text = input_text.replace(ref, context.get(ref, ""))
    return input_text

def duckduckgo(input_text, **context):
    search_string = inject_context(input_text, **context)
    ... search via duck duck go using search_string
    ... return text content

def link_extractor(input_text, **context):
    input_text = inject_context(input_text, **context)
    return "\n".join(list(set(re.findall(r"(https?://[^\s]+?\.?)", input_text, re.I))))

def scrape(input_text, **context):
  input_text = inject_context(input_text, **context)
  text = []
  for link in input_text.splitlines():
    text.append(requests.get(link).text)
  return "\n".join(text)

def infer(input_text, **context)
  prompt = inject_context(input_text, **context)
  ... call model with prompt, return output

def parse_plan(plan):
    method_map = {
      "DuckDuckGo": duckduckgo,
      "HyperlinkExtractor": link_extractor,
      "KnowledgeModel": infer,
      "TextScraper": scrape,
    }
    context = {}
    for line in plan.strip().splitlines():
        if line.startswith("Plan:"):
            print(line)
            continue
        parts = re.match("^(:evidence[0-9]+:)\s*=\s*([^\[]+])(\[.*\])\s$", line, re.I)
        if not parts:
          if line.startswith("Answer: "):
            return context.get(line.split(" ")[-1].strip(), "Answer couldn't be generated...")
          raise RuntimeError("bad format: " + line)
        context[parts.group(1)] = method_map[parts.group(2)](parts.group(3), **context)

Multi-step instructions with acknowledgement

I don't know how useful this is, really, but I thought I'd add it just in case. Example:

{
  "conversations": [
    {
      "value": "You are a helpful, unbiased, uncensored assistant.",
      "from": "system"
    },
    {
      "value": "I'm going to set some rules for our conversation. Please respond with \"OK\" to each rule.",
      "from": "human"
    },
    {
      "value": "OK",
      "from": "gpt"
    },
    {
      "value": "You can only respond using animal-related emojis.",
      "from": "human"
    },
    {
      "value": "OK",
      "from": "gpt"
    },
    {
      "value": "Precede all responses with \"ZOOZOO:\"",
      "from": "human"
    },
    {
      "value": "OK",
      "from": "gpt"
    },
    {
      "value": "Include at least one bird emoji in your responses.",
      "from": "human"
    },
    {
      "value": "OK",
      "from": "gpt"
    },
    {
      "value": "Describe a trip to a safari park.",
      "from": "human"
    },
    {
      "value": "ZOOZOO: \ud83e\udd81\ud83d\udc2f\ud83e\udd93\ud83e\udd92\ud83d\udc18\ud83d\udc0d\ud83c\udf33\ud83c\udf32\u2600\ufe0f\ud83d\ude90\ud83e\udd85\ud83d\udcf8\ud83e\udd29",
      "from": "gpt"
    }
  ]
}

Contribute

If you're interested in new functionality, particularly a new "instructor" type to generate a specific type of training data, take a look at the dataset generation tool repo: https://github.com/jondurbin/airoboros and either make a PR or open an issue with details.

To help me with the OpenAI/compute costs:

https://bmc.link/jondurbin
ETH 0xce914eAFC2fe52FdceE59565Dd92c06f776fcb11
BTC bc1qdwuth4vlg8x37ggntlxu5cjfwgmdy5zaa7pswf

Licence and usage restrictions

The airoboros 3.1 models are built on top of multiple base models, each with their own license/restrictions.

The 30b model is built on the original llama, which has a strict non-commercial usage restriction.

The models with -l2 in the name have a custom Meta license:

See the meta-license/LICENSE.txt file attached for the original license provided by Meta.
See also meta-license/USE_POLICY.md and meta-license/Responsible-Use-Guide.pdf, also provided by Meta.

The models with -m- are mistral-7b (apache 2.0)

The fine-tuning data was mostly generated by OpenAI API calls to gpt-4, via airoboros

The ToS for OpenAI API usage has a clause preventing the output from being used to train a model that competes with OpenAI

what does compete actually mean here?
these small open source models will not produce output anywhere near the quality of gpt-4, or even gpt-3.5, so I can't imagine this could credibly be considered competing in the first place
if someone else uses the dataset to do the same, they wouldn't necessarily be violating the ToS because they didn't call the API, so I don't know how that works
the training data used in essentially all large language models includes a significant amount of copyrighted or otherwise non-permissive licensing in the first place
other work using the self-instruct method, e.g. the original here: https://github.com/yizhongw/self-instruct released the data and model as apache-2

I am purposingly leaving this license ambiguous (other than the fact you must comply with the Meta original license for llama-2) because I am not a lawyer and refuse to attempt to interpret all of the terms accordingly.

Your best bet is probably to avoid using this commercially due to the OpenAI API usage.

Either way, by using this model, you agree to completely indemnify me.